TPS61055DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Camera Flash, Lighting |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.4W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | TPS61055 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Max Output Current | 1.2A |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Power Dissipation | 2.4W |
| Output Current | 500mA |
| Quiescent Current | 8.5mA |
| Voltage - Output | 5.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Current - Output / Channel | 500mA Flash |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61055DRCR Overview
Its 10-VFDFN Exposed Pad package is used to save board space. A LED driver using this design has 1 outputs.Surface Mount is used for mounting the led light driver.It emerges as a DC DC Regulator with high efficiency.It is capable of working normally at -40°C~85°C TA.There are many benefits for Camera Flash, Lighting.In the 2MHz frequency range, it operates.It operates using 10 terminations.The configuration of the board is built around 10 pins.1 segments are present.It is under the base part number TPS61055 that you can find this LED driver.It is acceptable to supply voltages of 6V volts.In this device, the output voltage is 5.5V volts.The device has 10 pins.Further, it can be classified as MOSFET Drivers based on its characteristics.The minimum input voltage for this device is 2.5V.The system operates at a minimum supply voltage of 2.5V in order to achieve maximum efficiency.There is 6V maximum value for supply current.In this case, the load can only be supplied with 500mA current.The maximum output current of 1.2A allows it to deliver all benefits of a LED driver.In the absence of external factors, there is 8.5mA consumption of current.
TPS61055DRCR Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 2MHz
Supply voltage of 3.6V
TPS61055DRCR Applications
There are a lot of Texas Instruments TPS61055DRCR LED Driver ICs applications.
- OLED power supply for portable equipment
- LED Lightings for Inspection Devices
- Stage Lighting and Signage
- LED headlights
- Medical surgery lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Constant Voltage Power Source for portable equipment
- Stage and Studio lighting
- Architectural lighting
- Industrial LED Lighting: Image Recognition Devices
