TPS61055DRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Camera Flash, Lighting |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.4W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS61055 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Max Output Current | 1.2A |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Power Dissipation | 2.4W |
| Output Current | 1.2A |
| Max Supply Current | 8.5mA |
| Quiescent Current | 8.5mA |
| Voltage - Output | 5.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Current - Output / Channel | 500mA Flash |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 1 |
| Switching Frequency | 2MHz |
| Multiplexed Display Capability | NO |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61055DRCT Overview
Board space is saved by its 10-VFDFN Exposed Pad package.A LED driver with 1 outputs is designed.Mounting is done according to the Surface Mount method.With high efficiency and reliable performance, it emerges as a DC DC Regulator.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Camera Flash, Lighting benefits significantly from the program.In order for it to operate, it has 10 terminations.The LED light driver is configured with a base of 0 pins.There are estimated to be 1 segments.This LED driver can be found under the base part number TPS61055.Ideally, the supply voltage should be 6V.There is 5.5V voltage output from it.A device with 10 pins is available.In addition, its characteristics are classified into MOSFET Drivers.Initially, it accepts a voltage of 2.5V.The system works with a minimum supply voltage of 2.5V in order to achieve maximum efficiency.6V is the maximum value of the supply current.Whenever the supply current is lower than 8.5mA, it can provide high efficiency.1.2A is the maximum amount of current that can be supplied to the load.Having the switching frequency at 2MHz enables this electronic component to perform at its best.The maximum output current of 1.2A allows it to deliver all benefits of a LED driver.No external factors result in 8.5mA current consumption.
TPS61055DRCT Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 2MHz
TPS61055DRCT Applications
There are a lot of Texas Instruments TPS61055DRCT LED Driver ICs applications.
- Down lights
- Industrial LED Lighting: Image Recognition Devices
- Down lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- White LED Backlight for portable equipment
- Sports Facility Lighting
- High-end retail lighting
- A- lamps
- Architectural lighting
- Replacement lamps
