TPS61058DRCR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight, Camera Flash |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS61058 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 80 % |
| Output Type | Adjustable |
| Max Output Current | 500mA |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 2.04W |
| Output Current | 500mA |
| Max Supply Current | 5.5mA |
| Quiescent Current | 5.5mA |
| Voltage - Output | 2.5V~5.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Switching Frequency | 650kHz |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61058DRCR Overview
On the board, there is also a 10-VFDFN Exposed Pad package that saves space.1 outputs are designed into LED drivers.As a mounting method, Surface Mount is used.It is highly performing and reliable when it emerges as a DC DC Regulator.-40°C~85°C TA is the operating temperature of the led driver.The benefits are considerable for Backlight, Camera Flash.It operates on the basis of the frequency of 750kHz.It is designed to work with 10 terminations.There are 10 pins used to form the base of its configuration.There is a base part number TPS61058 for this LED driver.As a maximum value, 5.5V is acceptable.The voltage output by it is 2.5V~5.5V.10 pins are used on the device.In addition to Switching Regulator or Controllers, it is also classified by its characteristics.A minimal input voltage of 2.7V is required for it to operate.A minimum supply voltage of 2.7V is required to meet the highest efficiency standards.When the maximum supply current is allowed, it reaches 5.5V.When the maximum supply current is below 5.5mA, the device can deliver high efficiency.There is no current available to supply to the load.This electronic component may perform its functions fully if the switching frequency is maintained at 650kHz.The maximum output current of 500mA allows it to deliver all benefits of a LED driver.When no external factors are present, there is 5.5mA current consumption.When using the device, there is a voltage of 3.6V volts assigned to the circuit.There is a type Adjustable output on this device.
TPS61058DRCR Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 750kHz
Switching frequency of 650kHz
TPS61058DRCR Applications
There are a lot of Texas Instruments TPS61058DRCR LED Driver ICs applications.
- Panel lighting
- A- lamps
- Amusement Machines
- Constant Voltage Power Source for portable equipment
- Auxiliary lights for on-vehicle cameras
- LED Lightings for Industrial Equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Refrigeration lighting
- OLED power supply for portable equipment
- Sports Facility Lighting
