TPS61059DRCR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight, Camera Flash |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS61059 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 80 % |
| Output Type | Adjustable |
| Max Output Current | 800mA |
| Input Voltage-Nom | 3.6V |
| Output Current | 800mA |
| Quiescent Current | 5.5mA |
| Max Output Voltage | 5.5V |
| Voltage - Output | 2.5V~5.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 2.5V |
| Internal Switch(s) | Yes |
| Switching Frequency | 650kHz |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS61059DRCR Overview
Board space is saved by its 10-VFDFN Exposed Pad package.Typically, LED drivers have 1 outputs.The led driver mounting is done by using Surface Mount.It is highly performing and reliable when it emerges as a DC DC Regulator.This LED driver can be operated at a temperature of -40°C~85°C TA. There are many benefits for Backlight, Camera Flash.This system operates at 750kHz frequency.For its operation, terminations with a value of 0 are used.To form its configuration, 10 pins are used.The LED driver is based on part number TPS61059.2.5V~5.5V is the output voltage.The device has 10 pins.Further, it can be classified as Switching Regulator or Controllers based on its characteristics.At a voltage of 2.7V, it operates at a minimal input voltage.It reaches 5.5V when the maximum supply current is allowed.The load is capable of receiving 800mA current.When the switching frequency is maintained at 650kHz, this electronic component is able to fully play its functions.At maximum output current 800mA, it will deliver all the benefits of a LED driver.5.5mA current is consumed in the case of no external factors.There shouldn't be an increase in output voltage over 5.5V.Device operation requires 3.6V volts from the circuit.It maintains a 2.5V voltage at its minimal output.The output type of the device is Adjustable.
TPS61059DRCR Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 750kHz
Switching frequency of 650kHz
TPS61059DRCR Applications
There are a lot of Texas Instruments TPS61059DRCR LED Driver ICs applications.
- Replacement lamps
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Dimmable LED for vehicle interiors
- Stage and Studio lighting
- General lighting
- Street lighting
- Gallery lighting
- Panel lighting
- LED Lighting PFCs, Linear Dimmable
- Down lighting
