TPS61059DRCT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight, Camera Flash |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS61059 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 80 % |
| Max Output Current | 800mA |
| Input Voltage-Nom | 3.6V |
| Power Dissipation | 2.04W |
| Output Current | 800mA |
| Quiescent Current | 5.5mA |
| Max Output Voltage | 5.5V |
| Voltage - Output | 2.5V~5.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 2.5V |
| Internal Switch(s) | Yes |
| Switching Frequency | 650kHz |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61059DRCT Overview
Its 10-VFDFN Exposed Pad package is used to save board space. Typically, LED drivers have 1 outputs.Surface Mount is used to mount the led driver.When it emerges as a DC DC Regulator, it shows high-performance and reliability.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.The benefits it provides to Backlight, Camera Flash are considerable.Based on the frequency of 750kHz, it operates.There are 10 terminations associated with it.It has a base of 10 pins.LED drivers can be found under the base part number TPS61059.It has a voltage output of 2.5V~5.5V.10 pins are on the device.In addition, it can also be categorized into Switching Regulator or Controllers based on its characteristics.A minimal input voltage of 2.7V is required for it to operate.Supply current cannot exceed 5.5V.There is no current that can be supplied to the load.This electronic component can fully perform its functions when the switching frequency is kept at 650kHz.When operating with a maximum output current of 800mA, it can deliver all the benefits of a LED driver.In the absence of external factors, there is 5.5mA consumption of current.5.5V should be the maximum output voltage.When using the device, there is a voltage of 3.6V volts assigned to the circuit.It maintains a voltage of 2.5V at its minimum output.Additionally, this LED driver is characterized by a ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 5.5V.
TPS61059DRCT Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 750kHz
Switching frequency of 650kHz
ALSO OPERATES IN ADJUSTABLE MODE FROM 2.5V TO 5.5V
TPS61059DRCT Applications
There are a lot of Texas Instruments TPS61059DRCT LED Driver ICs applications.
- Down lights
- Street lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Panel lighting
- LED Lightings for Industrial Equipment
- Scanners and Handy Terminals
- Amusement Machines
- LED headlights
- Sports Facility Lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
