TPS61059DRCTG4
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 750kHz |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Output Type | Adjustable |
| Max Output Current | 800mA |
| Input Voltage-Nom | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Current - Output | 800mA |
| Quiescent Current | 5.5mA |
| Max Output Voltage | 5.5V |
| Voltage - Output | 5.5V |
| Topology | Boost |
| Min Input Voltage | 2.7V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 650kHz |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 2.5V |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TPS61059DRCTG4 Overview
1 outputs are designed into LED drivers.The system operates at a frequency of 750kHz.For its operation, terminations with a value of 0 are used.This configuration is built upon 10 pins.The voltage of 5.5V is acceptable.The voltage at the output terminal is 5.5V.A total of 10 pins are present on this device.In addition to Switching Regulator or Controllers, it is also classified by its characteristics.As its minimal input voltage, it operates at a voltage of 2.7V.To meet high efficiency standards, it works with a voltage of 2.7V.5.5V is the maximum value of the supply current.Temperatures above 85°C should not be allowed to exceed operating temperatures in order to ensure stable operation.Operating temperatures should be above -40°C to ensure stable operation.When operating at the maximum output current of 800mA, it is capable of providing all the benefits associated with LED drivers.Absent external factors, there is 5.5mA consumption of current.It is recommended that the output voltage be no higher than 5.5V.A circuit operated by the device has 3.6V volts.Set the part output current to 800mA.2.5V is the minimal voltage it outputs.This device has a Adjustable output type.SWITCHING REGULATOR is the analog IC that this device employs.
TPS61059DRCTG4 Features
Frequency of 750kHz
TPS61059DRCTG4 Applications
There are a lot of Texas Instruments TPS61059DRCTG4 LED Driver ICs applications.
- Down lights
- Other Electronic Devices
- LED backlight driver for LCD displays for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED Lightings for Inspection Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage and Studio lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Dimmable LED for vehicle interiors
- Gallery lighting
