TPS61061DRBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.012046mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS61061 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Max Output Current | 60mA |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Output Current | 60mA |
| Max Supply Current | 400mA |
| Quiescent Current | 1mA |
| Voltage - Output | 18.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 6V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 400mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 60mA |
| Dimming | PWM |
| Number of Segments | 4 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61061DRBR Overview
The 8-VDFN Exposed Pad package conserves board space. This LED driver has 1 outputs.We are using Surface Mount as the mounting method.There is no doubt that this is a very efficient and reliable DC DC Regulator.If the led driver ic is set to -40°C~85°C TA, it will work normally.There are considerable benefits for Backlight.The system operates with a termination of 0.This LED driver is configured with a base of 8 pins.A total of 4 segments are estimated.It is under the base part number TPS61061 that you can find this LED driver.6V is an acceptable maximum value for the supply voltage.The output voltage of the device is 18.5V.This device contains 8 pins.As a result, it can also be classified as Display Drivers.A minimal input voltage of 2.7V is required for it to operate.The system works with a minimum supply voltage of 2.7V in order to achieve maximum efficiency.In the case of supply current, there is a maximum value of 6V.It is capable of delivering high efficiency when the maximal supply current is below 400mA.In this case, the load can only be supplied with 60mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 1MHz.When operating at the maximum output current of 60mA, it is capable of providing all the benefits associated with LED drivers.In the absence of external factors, 1mA current is consumed.
TPS61061DRBR Features
Available in the 8-VDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1MHz
TPS61061DRBR Applications
There are a lot of Texas Instruments TPS61061DRBR LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- Down lights
- OLED power supply for portable equipment
- Refrigeration lighting
- Portable lighting
- General lighting
- LED Lightings for Industrial Equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Street lighting
- White LED Backlight for portable equipment
