TPS61062DRBR
| Parameters | |
|---|---|
| Dimming | PWM |
| Number of Segments | 5 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.012046mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Base Part Number | TPS61062 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Max Output Current | 60mA |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Output Current | 60mA |
| Max Supply Current | 1mA |
| Quiescent Current | 1mA |
| Voltage - Output | 23.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 6V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 400mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 60mA |
TPS61062DRBR Overview
8-VDFN Exposed Pad package saves space on the board. Typically, LED drivers have 1 outputs.It is possible to mount the led driver using Surface Mount.In this case, it emerges as a DC DC Regulator with a high efficiency.The led light driver is capable of working normally at -40°C~85°C TA.There are significant benefits for Backlight.It is designed to work with 8 terminations.There are 8 pins on its base.The number of segments is estimated to be 5.LED drivers can be found under the base part number TPS61062.6V is an acceptable maximum value for the supply voltage.It has a voltage output of 23.5V.In this device, there are 8 pins.As a result, it can also be classified as Display Drivers.With a minimum input voltage of 2.7V volts, it can operate.As a result, it runs at a minimal voltage of 2.7V in order to achieve the best efficiency.The allowable maximum value of supply current reaches 6V.It is possible to provide high efficiency when the maximal supply current is less than 1mA.It is possible to supply the load with 60mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 1MHz.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 60mA.In the absence of external factors, 1mA current is consumed.
TPS61062DRBR Features
Available in the 8-VDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1MHz
TPS61062DRBR Applications
There are a lot of Texas Instruments TPS61062DRBR LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Architectural lighting
- Scanners and Handy Terminals
- Gallery lighting
- OLED power supply for portable equipment
- Down lights
- LED backlight driver for LCD displays for portable equipment
- Replacement lamps
- Portable lighting
- Constant Voltage Power Source for portable equipment
