TPS61062YZFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Base Part Number | TPS61062 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Max Output Current | 60mA |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Output Current | 60mA |
| Quiescent Current | 1mA |
| Voltage - Output | 23.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 6V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 400mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 5 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 625μm |
| Length | 1.75mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61062YZFR Overview
The 8-UFBGA, DSBGA package conserves board space. LED drivers use 1 outputs for their design.Surface Mount is used to mount the led driver.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.It is possible for the led driver ic to function normally at -40°C~85°C TA.Backlight has many advantages.It operates with 8 terminations.With 8 pins at the base, this LED driver has a base configuration.The segment count is 5.The LED driver is available under the part number TPS61062.6V is an acceptable voltage.The voltage at the output terminal is 23.5V.There are 8 pins on this device.According to its characteristics, it is also categorized into Display Drivers.As its minimal input voltage, it operates at a voltage of 2.7V.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 2.7V.Whenever the maximum supply current is allowed, the value reaches 6V.It is possible to supply the load with 60mA current.This electronic component can fully perform when the switching frequency is 1MHz.When operating with a 60mA output current, the LED driver delivers all the benefits.In the absence of external factors, 1mA current is consumed.
TPS61062YZFR Features
Available in the 8-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1MHz
TPS61062YZFR Applications
There are a lot of Texas Instruments TPS61062YZFR LED Driver ICs applications.
- Stage and Studio lighting
- Linear fluorescent
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Portable lighting
- Industrial LED Lighting: Image Recognition Devices
- Architectural lighting
- LED Lightings for Industrial Equipment
- Refrigeration lighting
- Museum lighting
- Medical surgery lighting
