TPS61071DDCR

6 Terminals 0.9V 6-Pin TPS61071 DC DC Voltage Regulator BATTERY CHARGE CONTROLLER 1 Outputs 1.2MHz Cut Tape (CT) 500mA Switch SOT-23-6 Thin, TSOT-23-6

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS61071DDCR
Package: SOT-23-6 Thin, TSOT-23-6
Datasheet: PDF
Stock: 904
Description: 6 Terminals 0.9V 6-Pin TPS61071 DC DC Voltage Regulator BATTERY CHARGE CONTROLLER 1 Outputs 1.2MHz Cut Tape (CT) 500mA Switch SOT-23-6 Thin, TSOT-23-6 (Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6 Thin, TSOT-23-6
Number of Pins	6
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.95mm
Base Part Number	TPS61071
Function	Step-Up
Number of Outputs	1
Efficiency	90 %
Output Voltage	5.5V
Output Type	Adjustable
Max Output Current	150mA
Operating Supply Voltage	5.5V
Voltage - Input (Min)	0.9V
Input Voltage-Nom	1.2V
Analog IC - Other Type	BATTERY CHARGE CONTROLLER
Output Configuration	Positive
Current - Output	500mA Switch
Quiescent Current	19μA
Max Output Voltage	5.5V
Voltage - Output (Min/Fixed)	1.8V
Topology	Boost
Control Mode	VOLTAGE-MODE
Frequency - Switching	1.2MHz
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	1.8V
Height	1.1mm
Length	2.9mm
Width	1.6mm
Thickness	870μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS61071DDCR Overview

For optimal performance, this voltage regulator makes use of the Cut Tape (CT) package. During the development of this harley voltage regulator, 6 terminations were made. As this regulator voltage is equipped with an analog IC of the type BATTERY CHARGE CONTROLLER, it is a BATTERY CHARGE CONTROLLER-type voltage regulator. The harley voltage regulator is available as a SOT-23-6 Thin, TSOT-23-6 package to save space. 1 outputs have been configured in the voltage regulator 12v. This DC DC switching regulator generates Adjustable output on its output pins. The voltage regulator 12v fits the Surface Mount mounting hole. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. A DC-DC switching regulator such as this one switches at 1.2MHz. Input voltage 0.9V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 1.8V. Featuring a maximum design flexibility of 500mA Switch, dc to dc voltage regulator has a maximum output current of 500mA Switch. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. For operation, voltage regulator provides a nominal input voltage of 1.2V. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. In the particular voltage regulators, the TPS61071 family is represented. Voltage regulator is capable of giving voltage at 5.5V volts. To operate the voltage regulator 12v, 6 pins are required. This voltage regulator 12v should be configured with an output voltage that is at least 1.8V. A maximum output current of 150mA A is available to meet the switching regulator operation requirements. The maximum output voltage of this regulator voltage is 5.5V. With 5.5V as the supply voltage, this DC-DC switching regulator will operate. External factors have no impact on DC DC switching regulator's ability to consume 19μA A of quiescent current.