Parameters |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
26.506804mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS61085 |
Function |
Step-Up |
Number of Outputs |
1 |
Output Voltage |
18.5V |
Output Type |
Adjustable |
Max Output Current |
2A |
Operating Supply Voltage |
6V |
Voltage - Input (Min) |
2.3V |
Input Voltage-Nom |
3.3V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Current - Output |
2A Switch |
Quiescent Current |
70μA |
Max Output Voltage |
18.5V |
Voltage - Output (Min/Fixed) |
2.8V |
Topology |
Boost |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
650kHz 1.2MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
No |
Min Output Voltage |
2.8V |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
TPS61085DGKTG4 Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. A voltage regulator consists of 8 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. In order to save space, this voltage regulator is packaged in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. 1 outputs of voltage regulator are configured. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. The voltage regulator 12v fits the Surface Mount mounting hole. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. There is a switching frequency of 650kHz 1.2MHz for this voltage regulator 12v. Input voltage 2.3V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 2.8V. It features maximum design flexibility due to dc to dc voltage regulator's 2A Switch output current. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. An input voltage of 3.3V is required to meet the requirements of the switching regulator operation. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. In this case, the DC/DC regulator belongs to the family TPS61085. There is a possibility that DC DC switching regulator can give voltage at 18.5V volts. 8 pins are used for switching regulator operation. As a general rule, this voltage regulator 12v should keep its output voltage at least at 2.8V. A 2A A maximum output current is required to meet the switching regulator operation requirements. A maximum voltage of 18.5V can be obtained from the regulator voltage. DC-DC switching regulator with supply voltage 6V. Without external influences, harley voltage regulator consumes 70μAA of quiescent current.
TPS61085DGKTG4 Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 6V
TPS61085DGKTG4 Applications
There are a lot of Texas Instruments TPS61085DGKTG4 Voltage Regulators applications.
- Mobile phones
- Geothermal power
- Overvoltage protection circuits in TV sets
- Shearing machines
- Automatic plug-in machines
- Arc suppression circuits
- Computer rooms
- Scientific testing
- Computer monitoring equipment of building
- Communication system