TPS61088RHLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS61088 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 91 % |
| Voltage - Input (Max) | 12V |
| Output Voltage | 12.6V |
| Output Type | Adjustable |
| Max Output Current | 10A |
| Operating Supply Voltage | 12V |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 110μA |
| Max Output Voltage | 12.6V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2.2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 4.5V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61088RHLR Description
With this step-up TPS61088RHLR DC to DC converter, you may adjust the voltage level of your devices. There is only one output on this converter. This will provide enough power to your circuit with a low input voltage of 2.7 V and a maximum of 12 V. This is power management at its finest, with an adjustable output voltage ranging from 4.5 to 12.6 V. The usual switch current for this device is 10 A. This converter has a 91% efficiency rating. You can use a switching frequency of 200 to 2200 kHz with this. The operational temperature range for this converter is -40°C to 85°C.
TPS61088RHLR Features
Thermal shutdown
10-A switch current
Programmable soft-start
2.7-V to 12-V input voltage range
4.5-V to 12.6-V output voltage range
Cycle-by-cycle overcurrent protection
Output overvoltage protection at 13.2 V
4.50-mm × 3.50-mm 20-pin VQFN package
1.0-μA current into the VIN pin during shutdown
Resistor-programmable switch peak current limit
Adjustable switching frequency: 200 kHz to 2.2 MHz
Up to 91% efficiency at VIN = 3.3 V, VOUT = 9 V, and IOUT = 3 A
Mode selection between PFM mode and forced PWM mode at light load
Create a custom design using the TPS61088 with the WEBENCH Power Designer
TPS61088RHLR Applications
E-cigarette
Bluetooth? speaker
Thunderbolt interface
Portable POS terminal
Quick charge power bank
