TPS61091RSAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 41.503702mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS61091 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 96 % |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 1.8V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 2A Switch |
| Quiescent Current | 20μA |
| Voltage - Output (Min/Fixed) | 3.3V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61091RSAR Overview
It uses the Cut Tape (CT) package in order to optimize the performance of this voltage regulator. During the development of this harley voltage regulator, 16 terminations were made. There is a BATTERY CHARGE CONTROLLER type analog IC in this voltage regulator 12v that is used to convey analog signals. Space savings are achieved by placing this voltage regulator in the 16-VQFN Exposed Pad package. There are 1 outputs configured on this voltage regulator 12v. The adjusting voltage regulator generates Fixed output. There is a switching regulator that is compatible with the Surface Mount mounting. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. A DC-DC switching regulator of this type operates at a switching frequency of 600kHz. The voltage regulator can be operated with a voltage as low as 1.8V as an input voltage. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 3.3V. DC DC switching regulator's 2A Switch output current allows for maximum design flexibility. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. DC/DC regulators such as this one belong to the TPS61091 family of products. At 3.3V volts, voltage regulator can provide voltage. In order to operate voltage regulator, there are 16 pins that must be connected. The maximum output current reaches 500mA A to meet the switching regulator operation requirements. DC-DC switching regulator with 5.5V supply voltage. There is no external influence on harley voltage regulator as it consumes 20μA A of quiescent current.
TPS61091RSAR Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
Operating supply voltage of 5.5V
TPS61091RSAR Applications
There are a lot of Texas Instruments TPS61091RSAR Voltage Regulators applications.
- Automatic plug-in machines
- Experimental setup
- Smart grid
- Planers
- Bending machines
- Household control circuits
- Imported equipment
- Window air conditioners
- Mobile phones
- Milling machines
