TPS61140DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Additional Feature | PFM TECHNIQUE IS ALSO POSSIBLE |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 1.2MHz |
| Base Part Number | TPS61140 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Voltage | 15V |
| Max Output Current | 23mA |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Output Current | 23mA |
| Max Supply Current | 2mA |
| Quiescent Current | 125μA |
| Max Output Voltage | 27V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 2.5V |
| Current - Output / Channel | 35mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61140DRCR Overview
To save space on the board, it has a 10-VFDFN Exposed Pad package. A LED driver using this design has 2 outputs.Surface Mount represents this mounting method.DC DC Regulator emerges with high efficiency and reliability.It is capable of working normally at -40°C~85°C TA.A number of benefits are available to Backlight.This system operates at 1.2MHz frequency.10 terminations are designed for its operation.This module has 10 pins as its base.The segment count is 4.LED drivers are found under the base part number TPS61140.It is acceptable to supply voltages of 6V.10 pins are on the device.This device operates with a minimum input voltage of 3V volts.This system is designed to operate at a minimum voltage of 2.5V to achieve maximum efficiency.The maximum supply current is reached when 6V is reached.Its high efficiency is based on the fact that the maximal supply current should not exceed 2mA.A load can be supplied with 23mA current.Even when operating at a maximal output current of 23mA, it is capable of delivering all the benefits of a LED driver.There is no external factor that can consume current, so 125μA current is consumed.Currently, it is generating 15V voltage.Voltages above 27V should not be allowed.When the device is operated, it has 3.6V volts assigned to it.It maintains a 2.5V minimum voltage output.Additionally, this LED driver has a PFM TECHNIQUE IS ALSO POSSIBLE.
TPS61140DRCR Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Output voltage of 15V
PFM TECHNIQUE IS ALSO POSSIBLE
TPS61140DRCR Applications
There are a lot of Texas Instruments TPS61140DRCR LED Driver ICs applications.
- High-end retail lighting
- Museum lighting
- Amusement Machines
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Down lighting
- Constant Voltage Power Source for portable equipment
- LED Lightings for Industrial Equipment
- Sports Facility Lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
