TPS61140DRCT
| Parameters | |
|---|---|
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Additional Feature | PFM TECHNIQUE IS ALSO POSSIBLE |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS61140 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Efficiency | 82 % |
| Output Voltage | 15V |
| Max Output Current | 23mA |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Output Current | 23mA |
| Max Supply Current | 2mA |
| Quiescent Current | 125μA |
| Max Output Voltage | 27V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 2.5V |
| Current - Output / Channel | 35mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Switching Frequency | 1.2MHz |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
TPS61140DRCT Overview
Its 10-VFDFN Exposed Pad package is used to save board space. 2 outputs are designed into LED drivers.Surface Mount is used for mounting the led light driver.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.There are considerable benefits for Backlight.The terminations 10 are designed for its operation.Its configuration is based on 10 pins.It is estimated that there are 4 segments.The LED driver can be found under the base part number TPS61140.It is acceptable to operate with a supply voltage of 6V.There are 10 pins on it.It operates at a voltage of 3V as its minimal input voltage.This system is designed to operate at a minimum voltage of 2.5V to achieve maximum efficiency.It is possible to supply current up to 6V.If the maximum current supply is less than 2mA, this device provides high efficiency.The current that can be supplied to the load is 23mA.It is capable of fulfilling its full functionality when the switching frequency remains at 1.2MHz.At maximum output current 23mA, it will deliver all the benefits of a LED driver.In the absence of external factors, there is 125μA consumption of current.A 15V voltage is output by it.The output voltage should not be in excess of 27V.When operating the device, 3.6V volts are assigned to the circuit.A voltage of 2.5V is maintained as the minimal voltage it outputs.Moreover, this LED driver contains a PFM TECHNIQUE IS ALSO POSSIBLE.
TPS61140DRCT Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Switching frequency of 1.2MHz
Output voltage of 15V
PFM TECHNIQUE IS ALSO POSSIBLE
TPS61140DRCT Applications
There are a lot of Texas Instruments TPS61140DRCT LED Driver ICs applications.
- Gallery lighting
- White LED Backlight for portable equipment
- Amusement Machines
- Medical surgery lighting
- Flicker-free LED Lighting using R1580N
- Down lighting
- High-end retail lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Dimmable LED for vehicle interiors
- LED Lighting PFCs, Linear Dimmable
