TPS61140DRCTG4
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 1.2MHz |
| Base Part Number | TPS61140 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Voltage | 15V |
| Max Output Current | 23mA |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Output Current | 23mA |
| Max Supply Current | 2mA |
| Quiescent Current | 125μA |
| Max Output Voltage | 27V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 2.5V |
| Current - Output / Channel | 35mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Additional Feature | PFM TECHNIQUE IS ALSO POSSIBLE |
TPS61140DRCTG4 Overview
Its 10-VFDFN Exposed Pad package is used to save board space. A LED driver with 2 outputs is designed.The led driver mounting is done by using Surface Mount.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.There are considerable benefits for Backlight.The system operates on the basis of the frequency 1.2MHz.In this case, the termination value is 10.The LED light driver is configured with a base of 0 pins.It consists of 4 segments.It can be found under the part number TPS61140.It is acceptable for the supply voltage to be 6V.A total of 10 pins are present on this device.At its minimal input voltage, it operates at 3V.For maximum efficiency, it operates at the minimal voltage of 2.5V.When the maximum supply current is allowed, it reaches 6V.As long as the maximum supply current is less than 2mA, this device is capable of providing high efficiency.You can supply 23mA current to the load.When operating with a 23mA output current, the LED driver delivers all the benefits.125μA current is consumed in the case of no external factors.There is 15V output voltage on this device.It is important to keep the output voltage below 27V.When operating the device, 3.6V volts are assigned to the circuit.A minimum voltage of 2.5V is maintained by its output.The LED driver is further characterized by a PFM TECHNIQUE IS ALSO POSSIBLE.
TPS61140DRCTG4 Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Output voltage of 15V
PFM TECHNIQUE IS ALSO POSSIBLE
TPS61140DRCTG4 Applications
There are a lot of Texas Instruments TPS61140DRCTG4 LED Driver ICs applications.
- Down lights
- Panel lighting
- OLED power supply for portable equipment
- Auxiliary lights for on-vehicle cameras
- Refrigeration lighting
- Gallery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Amusement Machines
- Portable lighting
- LED Lighting PFCs, Linear Dimmable
