TPS61141DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Additional Feature | PFM TECHNIQUE IS ALSO POSSIBLE |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 1.2MHz |
| Base Part Number | TPS61141 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 23mA |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Output Current | 23mA |
| Max Supply Current | 2mA |
| Quiescent Current | 125μA |
| Max Output Voltage | 27V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 2.5V |
| Current - Output / Channel | 35mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61141DRCR Overview
On the board, there is also a 10-VFDFN Exposed Pad package that saves space.These LED drivers have 2 outputs.Surface Mount is used for mounting.In this case, the DC DC Regulator emerges as highly efficient and reliable.It is possible for the led light driver to operate at a temperature of -40°C~85°C TA.The benefits of Backlight are considerable.The system operates on the basis of the frequency 1.2MHz.For its operation, 10 terminations are designed.This module has 10 pins as its base.There are 4 segments in it.LED drivers have a base part number of TPS61141.It is acceptable to supply voltages of 6V volts.This device contains 10 pins.As its minimal input voltage, it operates at a voltage of 2.5V.A minimal supply voltage of 2.5V is required for it to achieve the highest efficiency.It is possible to supply current up to 6V.When the maximum supply current is less than 2mA, this device is able to provide high efficiency.The load is capable of receiving 23mA current.LED drivers deliver all their benefits with a maximum output current of 23mA.No external factors cause 125μA current to be consumed.It is recommended that the output voltage be no higher than 27V.When using the device, there is a voltage of 3.6V volts assigned to the circuit.This device maintains a minimal voltage of 2.5V.Moreover, this LED driver is characterized by PFM TECHNIQUE IS ALSO POSSIBLE.
TPS61141DRCR Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
PFM TECHNIQUE IS ALSO POSSIBLE
TPS61141DRCR Applications
There are a lot of Texas Instruments TPS61141DRCR LED Driver ICs applications.
- High-end retail lighting
- Museum lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Flicker-free LED Lighting using R1580N
- Portable lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lights
- Gallery lighting
- LED Lightings for Industrial Equipment
