TPS61141DRCT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Additional Feature | PFM TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 1.2MHz |
| Base Part Number | TPS61141 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 23mA |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Output Current | 23mA |
| Max Supply Current | 2mA |
| Quiescent Current | 125μA |
| Max Output Voltage | 27V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 2.5V |
| Current - Output / Channel | 35mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS61141DRCT Overview
In order to save board space, the led driver uses the 10-VFDFN Exposed Pad package. Typically, LED drivers have 2 outputs.To mount, use Surface Mount.It is highly performing and reliable when it emerges as a DC DC Regulator.-40°C~85°C TA is a valid operating temperature for the led driver.Backlight has many benefits.The system operates on the basis of the frequency 1.2MHz.10 terminations are used in its operation.It has a base of 10 pins.The segment count is 4.The LED driver can be found under the base part number TPS61141.6V is an acceptable maximum value for the supply voltage.10 pins are available on the device.Moreover, it can be classified as Switching Regulator or Controllers due to its characteristics.This device requires a minimum voltage of 3V volts.The system operates at a minimum supply voltage of 2.5V in order to achieve maximum efficiency.In the event that the maximum supply current is allowed, it reaches 6V.When the maximum supply current is less than 2mA, this device is able to provide high efficiency.Loads can only be powered by 23mA current.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 23mA.A current of 125μA is consumed in the absence of external influences.The output voltage should not be in excess of 27V.When the device is operated, it has 3.6V volts assigned to it.It maintains a 2.5V minimum voltage output.The LED driver is further characterized by a PFM TECHNIQUE IS ALSO POSSIBLE.
TPS61141DRCT Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
PFM TECHNIQUE IS ALSO POSSIBLE
TPS61141DRCT Applications
There are a lot of Texas Instruments TPS61141DRCT LED Driver ICs applications.
- Down lights
- Constant Voltage Power Source for portable equipment
- Replacement lamps
- LED backlight driver for LCD displays for portable equipment
- Architectural lighting
- OLED power supply for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- A- lamps
- LED Lightings for Industrial Equipment
- General lighting
