TPS61141DRCTG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Additional Feature | PFM TECHNIQUE IS ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 1.2MHz |
| Base Part Number | TPS61141 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 23mA |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Output Current | 23mA |
| Max Supply Current | 2mA |
| Quiescent Current | 125μA |
| Max Output Voltage | 27V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 2.5V |
| Current - Output / Channel | 35mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS61141DRCTG4 Overview
Space is saved using its 10-VFDFN Exposed Pad package. LED drivers design with 2 outputs.Surface Mount is used for mounting the led light driver.In this case, the DC DC Regulator emerges as highly efficient and reliable.This LED driver can be operated at a temperature of -40°C~85°C TA. Backlight has significant advantages.Frequency 1.2MHz is the basis of operation.In this case, the termination value is 10.The LED light driver is configured with a base of 0 pins.The number of segments is estimated to be 4.It is under the base part number TPS61141 that the LED driver can be found.It's acceptable for the voltage to be 6V.On it, there are 10 pins.As a result of its characteristics, it is also classified as Switching Regulator or Controllers.The minimal input voltage is 2.5V.As a result, it runs at a minimal voltage of 2.5V in order to achieve the best efficiency.In the event that the maximum supply current is allowed, it reaches 6V.When the maximum supply current is below 2mA, the device can deliver high efficiency.There is no current available to supply to the load.A LED driver that operates at 23mA output current provides all the benefits of a LED driver.There is no external factor that can consume current, so 125μA current is consumed.It is important that the output voltage does not exceed 27V.When the device is operated, it has 3.6V volts assigned to it.2.5V is the minimal voltage it outputs.As a result, this LED driver has a PFM TECHNIQUE IS ALSO POSSIBLE characteristic.
TPS61141DRCTG4 Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
PFM TECHNIQUE IS ALSO POSSIBLE
TPS61141DRCTG4 Applications
There are a lot of Texas Instruments TPS61141DRCTG4 LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Down lighting
- OLED power supply for portable equipment
- Auxiliary lights for on-vehicle cameras
- LED Lightings for Industrial Equipment
- White LED Backlight for portable equipment
- Constant Voltage Power Source for portable equipment
- Refrigeration lighting
- Sports Facility Lighting
- Amusement Machines
