TPS61150ADRCRG4
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.5MHz |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 34mA |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Power Dissipation-Max | 370mW |
| Power Dissipation | 370mW |
| Max Supply Current | 2mA |
| Current - Output | 45mA |
| Quiescent Current | 2mA |
| Max Output Voltage | 27V |
| Voltage - Output | 27V |
| Topology | Boost |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Min Output Voltage | 2.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| Low Level Output Current | 34mA |
| Number of Segments | 14 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TPS61150ADRCRG4 Overview
For the design of these LED drivers, 2 outputs are used.As a result, it operates based on the frequency of 1.5MHz.10 terminations are designed for its operation.The base is configured with 10 pins.It is estimated that there are 14 segments.It is acceptable for the voltage to be 6V.A 27V volt output voltage is provided by this device.In addition, it is equipped with a total of 10 pins.In addition, its characteristics are classified into Display Drivers.This device operates with a minimum input voltage of 2.5V volts.To meet high efficiency standards, it works with a voltage of 2.5V.6V is the maximum value of the supply current.A minimal supply current is required in order for this device to provide high efficiency.It is important not to exceed 85°C in order to ensure stable operation.The operating temperature should be higher than -40°C so as to realize stable operation.LED drivers can deliver all benefits of 34mA due to their maximum output current.No external factors cause 2mA current to be consumed.The interface IC for this part is marked with the LED DISPLAY DRIVER.It is not recommended to exceed 27V in the output voltage.Keep the part's output current at 45mA volts.It maintains a 2.5V minimum voltage output.
TPS61150ADRCRG4 Features
Frequency of 1.5MHz
Supply voltage of 3.6V
TPS61150ADRCRG4 Applications
There are a lot of Texas Instruments TPS61150ADRCRG4 LED Driver ICs applications.
- Amusement Machines
- General lighting
- Down lighting
- Other Electronic Devices
- LED Lightings for Industrial Equipment
- LED Lighting PFCs, Linear Dimmable
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- A- lamps
- Industrial LED Lighting: Image Recognition Devices
- Constant Voltage Power Source for portable equipment
