TPS61150ADRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 370mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS61150 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Efficiency | 83 % |
| Max Output Current | 34mA |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Power Dissipation | 370mW |
| Output Current | 45mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Max Output Voltage | 27V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Output Current per Channel | 34mA |
| Min Output Voltage | 2.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Low Level Output Current | 34mA |
| fmax-Min | 1.5 MHz |
| Dimming | PWM |
| Number of Segments | 14 |
| Switching Frequency | 1.2MHz |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61150ADRCT Overview
Additionally, there is a 10-VFDFN Exposed Pad package for saving space.A LED driver using this design has 2 outputs.Surface Mount is used to mount the led light driver.It emergys as a DC DC Regulator with high efficiency and reliable performance.It is able to work normally at the operating temperature of -40°C~85°C TA.Backlight has many advantages.It operates with 10 terminations.This LED driver is configured with a base of 10 pins.There are 14 segments in it.You can find this LED driver under the base part number TPS61150.6V is a maximum acceptable voltage for the supply.The device has a pin count of 10.Moreover, it can be classified as Display Drivers due to its characteristics.When the input voltage is set to 2.5V, it operates.It achieves maximum efficiency with a minimal voltage supply of 2.5V.There is 6V maximum value for supply current.When the maximum supply current is less than 2mA, the device is able to provide a high level of efficiency.A load can be supplied with 45mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 1.2MHz.At maximum output current 34mA, it will deliver all the benefits of a LED driver.In the absence of external factors, 2mA current is consumed.It is important to keep the output voltage below 27V.The voltage it outputs stays at 2.5V.
TPS61150ADRCT Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.2MHz
TPS61150ADRCT Applications
There are a lot of Texas Instruments TPS61150ADRCT LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- Medical surgery lighting
- Replacement lamps
- Auxiliary lights for on-vehicle cameras
- Panel lighting
- OLED power supply for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Refrigeration lighting
- Industrial LED Lighting: Image Recognition Devices
- General lighting
