TPS61150ADRCTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 370mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.2MHz |
| Base Part Number | TPS61150 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 34mA |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Power Dissipation | 370mW |
| Output Current | 45mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Max Output Voltage | 27V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Min Output Voltage | 2.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Low Level Output Current | 34mA |
| fmax-Min | 1.5 MHz |
| Dimming | PWM |
| Number of Segments | 14 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61150ADRCTG4 Overview
As a result of its 10-VFDFN Exposed Pad package, it helps to save board space on the board. It has 2 outputs for LED drivers.For mounting, it uses the Surface Mount method.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.When the temperature is -40°C~85°C TA, it can work normally.The benefits it provides to Backlight are considerable.It operates at 1.2MHz frequency.A termination of 10 is used to operate the LED driver.The configuration of the board is built around 10 pins.A total of 14 segments are estimated.Under the base part number TPS61150, you'll find this LED driver.It is acceptable to operate with a supply voltage of 6V.The device has a pin count of 10.In addition, it can also be categorized into Display Drivers based on its characteristics.A voltage of 2.5V is its minimal input voltage.For highest efficiency, it works with a minimal supply voltage of 2.5V.In the case of supply current, there is a maximum value of 6V.When the maximum supply current is below 2mA, the device can deliver high efficiency.The current that can be supplied to the load is 45mA.The maximum output current of 34mA allows it to deliver all benefits of a LED driver.In the absence of external factors, there is 2mA consumption of current.It is recommended that the output voltage be no higher than 27V.A voltage of 2.5V is maintained as the minimal voltage it outputs.
TPS61150ADRCTG4 Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
TPS61150ADRCTG4 Applications
There are a lot of Texas Instruments TPS61150ADRCTG4 LED Driver ICs applications.
- Scanners and Handy Terminals
- General lighting
- Medical surgery lighting
- Other Electronic Devices
- Down lighting
- Amusement Machines
- Sports Facility Lighting
- Portable lighting
- LED Lighting PFCs, Linear Dimmable
- Architectural lighting
