TPS61150DRCTG4
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.5MHz |
| Pin Count | 10 |
| Max Output Current | 35mA |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Max Supply Current | 2mA |
| Current - Output | 45mA |
| Quiescent Current | 2mA |
| Max Output Voltage | 27V |
| Voltage - Output | 27V |
| Topology | Boost |
| Min Input Voltage | 3V |
| Max Input Voltage | 6V |
| Min Output Voltage | 2.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| Number of Segments | 14 |
| Multiplexed Display Capability | NO |
| Height | 900μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS61150DRCTG4 Overview
Based on the frequency of 1.5MHz, it operates on the basis of a pulse.In this case, the termination value is 10.The LED light driver has a base configuration of 10 pins.The number of segments is 14.It is acceptable to supply voltages of 6V.It has a voltage output of 27V.There are 10 pins on this device.According to its characteristics, it is also categorized into Display Drivers.At its minimal input voltage, it operates at 3V.With a minimal supply voltage of 2.5V, it reaches the highest efficiency levels.The maximum supply current is 6V.This device is able to provide high efficiency when the maximal supply current should be less than 2mA.It is important that the operating temperature not exceed 85°C in order to ensure stable operation.Stable operation requires a temperature higher than -40°C.A LED driver that operates at 35mA output current provides all the benefits of a LED driver.No external factors cause 2mA current to be consumed.It comes with an interface chip marked LED DISPLAY DRIVER.It is recommended that the output voltage be no higher than 27V.Ensure that the part output current is 45mA.It maintains a 2.5V minimum voltage output.There are 2 transmission channels available.
TPS61150DRCTG4 Features
Frequency of 1.5MHz
Supply voltage of 3.6V
TPS61150DRCTG4 Applications
There are a lot of Texas Instruments TPS61150DRCTG4 LED Driver ICs applications.
- High-end retail lighting
- Flicker-free LED Lighting using R1580N
- LED Lightings for Inspection Devices
- Dimmable LED for vehicle interiors
- A- lamps
- Medical surgery lighting
- Constant Voltage Power Source for portable equipment
- LED Lighting PFCs, Linear Dimmable
- White LED Backlight for portable equipment
- Replacement lamps
