TPS61151DRCRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.2MHz |
| Base Part Number | TPS61151 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 35mA |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Output Current | 45mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Max Output Voltage | 27V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 6V |
| Output Characteristics | CONSTANT-CURRENT |
| Min Output Voltage | 2.5V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 35mA |
| Internal Switch(s) | Yes |
| fmax-Min | 1.5 MHz |
| Dimming | PWM |
| Number of Segments | 14 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61151DRCRG4 Overview
To save space on the board, it has a 10-VFDFN Exposed Pad package. In LED drivers, the outputs are all set to 2.Surface Mount is used for mounting.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.-40°C~85°C TA is a valid operating temperature for the led driver.There are significant benefits for Backlight.In this case, the frequency is 1.2MHz.In this case, the terminations are set to 10.In this LED driver, the base is configured as 10.A total of 14 segments are estimated.A base part number of TPS61151 is associated with this LED driver.An acceptable maximum value for the supply voltage is 6V.This device contains 10 pins.Depending on its characteristics, it is classified into Display Drivers.With 3V as the minimal input voltage, it operates.A minimal supply voltage of 2.5V is required for it to achieve the highest efficiency.There is 6V maximum value for supply current.In order to maintain maximum efficiency, the supply current cannot exceed 2mA.45mA is the maximum current the load can handle.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 35mA.In the absence of external factors, 2mA current is consumed.It is important that the output voltage does not exceed 27V.A minimum voltage of 2.5V is maintained by its output.
TPS61151DRCRG4 Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
TPS61151DRCRG4 Applications
There are a lot of Texas Instruments TPS61151DRCRG4 LED Driver ICs applications.
- Street lighting
- Constant Voltage Power Source for portable equipment
- Down lights
- Stage Lighting and Signage
- Down lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- OLED power supply for portable equipment
- White LED Backlight for portable equipment
- General lighting
- High-end retail lighting
