TPS61160DRVR
| Parameters | |
|---|---|
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.54W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Base Part Number | TPS61160 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 1.54W |
| Output Current | 700mA |
| Max Supply Current | 1.8mA |
| Quiescent Current | 1.5mA |
| Voltage - Output | 26V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 18V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 700mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 100μA |
| Low Level Output Current | 100μA |
| Dimming | PWM |
| Number of Segments | 10 |
| Switching Frequency | 600kHz |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
TPS61160DRVR Overview
Space is saved using its 6-WDFN Exposed Pad package. As part of the design of this LED driver, there are 1 outputs that have been used.Surface Mount represents this mounting method.There is no doubt that this is a very efficient and reliable DC DC Regulator.-40°C~85°C TA is a valid operating temperature for the led driver.The benefits are considerable for Backlight.There are 6 terminations associated with it.It has a base of 6 pins.A total of 10 segments are estimated.LED drivers are found under the base part number TPS61160.The voltage of 18V can be supplied.A 26V volt output voltage is provided by this device.6 pins are on the device.The Display Drivers is also assigned based on its characteristics.It operates at a voltage of 2.7V as its minimal input voltage.A minimal supply voltage of 2.7V is required for it to achieve the highest efficiency.The allowable maximum value of supply current reaches 18V.When the maximum supply current is less than 1.8mA, this device is able to provide high efficiency.Loads can only be powered by 700mA current.This electronic component may perform its functions fully if the switching frequency is maintained at 600kHz.In the absence of external factors, there is 1.5mA consumption of current.
TPS61160DRVR Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 600kHz
TPS61160DRVR Applications
There are a lot of Texas Instruments TPS61160DRVR LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- General lighting
- A- lamps
- LED Lightings for Industrial Equipment
- Stage and Studio lighting
- Refrigeration lighting
- LED Lightings for Inspection Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Down lights
- Constant Voltage Power Source for portable equipment
