TPS61160DRVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.54W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Base Part Number | TPS61160 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Max Output Current | 700mA |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 1.54W |
| Output Current | 700mA |
| Max Supply Current | 1.8mA |
| Quiescent Current | 1.5mA |
| Voltage - Output | 26V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 18V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 700mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 100μA |
| Low Level Output Current | 100μA |
| Dimming | PWM |
| Number of Segments | 10 |
| Switching Frequency | 600kHz |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61160DRVT Overview
Save board space with 6-WDFN Exposed Pad package. LED drivers design with 1 outputs.This mounting method is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.-40°C~85°C TA is the operating temperature and it works fine.Backlight has considerable advantages.In order for it to operate, it has 6 terminations.Its configuration is based on 6 pins.The segment count is 10.It is under the base part number TPS61160 that the LED driver can be found.There is no maximum value acceptable for the supply voltage, so 18V is acceptable.This device has an output voltage of 26V volts.6 pins are used on the device.Further, its characteristics allow it to be classified as Display Drivers.This device requires a minimum voltage of 2.7V volts.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 2.7V.There is 18V maximum value for supply current.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 1.8mA.You can supply 700mA current to the load.Electronic components can function properly when their switching frequency is set to 600kHz.At maximum output current 700mA, it will deliver all the benefits of a LED driver.No external factors cause 1.5mA current to be consumed.
TPS61160DRVT Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 600kHz
TPS61160DRVT Applications
There are a lot of Texas Instruments TPS61160DRVT LED Driver ICs applications.
- A- lamps
- Panel lighting
- Museum lighting
- LED Lighting PFCs, Linear Dimmable
- Down lights
- Replacement lamps
- High-end retail lighting
- Dimmable LED for vehicle interiors
- LED backlight driver for LCD displays for portable equipment
- Amusement Machines
