banner_page

TPS61162DYFFR

0.4mm PMIC TPS61162 9 Pin 3.6V 9-UFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS61162DYFFR
  • Package: 9-UFBGA, DSBGA
  • Datasheet: -
  • Stock: 569
  • Description: 0.4mm PMIC TPS61162 9 Pin 3.6V 9-UFBGA, DSBGA (Kg)

Details

Tags

Parameters
Lifecycle Status NRND (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 9-UFBGA, DSBGA
Number of Pins 9
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Pbfree Code yes
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 9
Type DC DC Regulator
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Applications Backlight
Subcategory Display Drivers
Terminal Position BOTTOM
Terminal Form BALL
Number of Functions 1
Supply Voltage 3.6V
Terminal Pitch 0.4mm
Base Part Number TPS61162
Number of Outputs 2
Max Output Current 60mA
Max Supply Voltage 6.5V
Min Supply Voltage 2.7V
Quiescent Current 1mA
Max Output Voltage 27V
Voltage - Output 2.7V~27V
Topology Step-Up (Boost)
Max Input Voltage 6.5V
Output Current per Channel 1.5A
Min Output Voltage 2.7V
Input Characteristics STANDARD
Current - Output / Channel 30mA
Internal Switch(s) Yes
fmax-Min 0.1 MHz
Dimming Analog, PWM
Number of Segments 20
Switching Frequency 1.2MHz
Multiplexed Display Capability NO
Nominal Input Voltage (DC) 3.6V
Height 625μm
Length 1.4mm
Width 1.4mm
Thickness 425μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS61162DYFFR Overview


The 9-UFBGA, DSBGA package is used for saving board space. There are 2 outputs used for the design of this LED drivers.The mounting method adopted is Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Regulator.If the led driver ic is set to -40°C~85°C TA, it will work normally.Backlight has considerable advantages.In order for it to operate, it has 9 terminations.With 9 pins at the base, this LED driver has a base configuration.We estimate that there are 20 segments.It has been mounted on Surface Mount.LED drivers have a base part number of TPS61162.6.5V is an acceptable maximum value for the supply voltage.A voltage output of 2.7V~27V is provided by this device.Further, its characteristics allow it to be classified as Display Drivers.With a minimal supply voltage of 2.7V, it reaches the highest efficiency levels.6.5V is the maximum value of supply current that can be used.It is capable of fulfilling its full functionality when the switching frequency remains at 1.2MHz.LED drivers deliver all their benefits with a maximum output current of 60mA.There is no external factor that can consume current, so 1mA current is consumed.There shouldn't be an increase in output voltage over 27V.A voltage of 2.7V is maintained as the minimal voltage it outputs.

TPS61162DYFFR Features


Available in the 9-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.2MHz

TPS61162DYFFR Applications


There are a lot of Texas Instruments TPS61162DYFFR LED Driver ICs applications.

  • Gallery lighting
  • OLED power supply for portable equipment
  • Power source for accessories such as car audios, car navigation systems, and ETC systems
  • White LED Backlight for portable equipment
  • Flicker-free LED Lighting using R1580N
  • Linear fluorescent
  • Down lights
  • General lighting
  • A- lamps
  • Replacement lamps

Write a review

Note: HTML is not translated!
    Bad           Good