TPS61163YFFR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-UFBGA, DSBGA |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | TPS61163 |
| Number of Outputs | 2 |
| Max Output Current | 60mA |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 30mA |
| Max Supply Current | 2mA |
| Quiescent Current | 1mA |
| Max Output Voltage | 38V |
| Voltage - Output | 2.7V~38V |
| Topology | Step-Up (Boost) |
| Max Input Voltage | 6.5V |
| Output Current per Channel | 1.5A |
| Min Output Voltage | 2.7V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| fmax-Min | 0.1 MHz |
| Dimming | Analog, PWM |
| Number of Segments | 20 |
| Switching Frequency | 1.2MHz |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 3.6V |
| Height | 625μm |
| Length | 1.4mm |
| Width | 1.4mm |
| Thickness | 425μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61163YFFR Overview
There is a 9-UFBGA, DSBGA package on the board that is used to save space. A LED driver with 2 outputs is designed.Surface Mount is used to mount the led light driver.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.-40°C~85°C TA is the operating temperature for the led light driver.It is clear that Backlight will benefit from the program.In this case, it operates with terminations of 0.With a base of 9, this LED light driver is configured.There are estimated to be 20 segments.Surface Mount is mounted on it.Under the base part number TPS61163, you'll find this LED driver.An acceptable maximum value for the supply voltage is 6.5V.The voltage at the output terminal is 2.7V~38V.In addition, it can also be categorized into Display Drivers based on its characteristics.It achieves maximum efficiency with a minimal voltage supply of 2.7V.The allowable maximum value of supply current reaches 6.5V.When the maximum supply current is below 2mA, the device can deliver high efficiency.A load can be supplied with 30mA current.When the switching frequency is maintained at 1.2MHz, this electronic component is able to fully play its functions.LED drivers deliver all their benefits with a maximum output current of 60mA.There is no external factor that consumes current when there is 1mA current consumption.Voltages should not exceed 38V volts at the output.The voltage it outputs stays at 2.7V.
TPS61163YFFR Features
Available in the 9-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.2MHz
TPS61163YFFR Applications
There are a lot of Texas Instruments TPS61163YFFR LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Other Electronic Devices
- A- lamps
- Down lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Architectural lighting
- Flicker-free LED Lighting using R1580N
- Amusement Machines
- Replacement lamps
- Panel lighting
