TPS61165DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Automotive, Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 470mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS61165 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Power Dissipation | 470mW |
| Output Current | 100mA |
| Max Supply Current | 2.3mA |
| Quiescent Current | 1.5mA |
| Voltage - Output | 3V~38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 18V |
| Output Characteristics | OPEN-DRAIN |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1.2A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 10 |
| Switching Frequency | 1.2MHz |
| Multiplexed Display Capability | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61165DBVT Overview
To save board space, it uses the SOT-23-6 package. A LED driver using this design has 1 outputs.Surface Mount is used for mounting.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.-40°C~85°C TA is the operating temperature of the led driver.There are considerable benefits for Automotive, Backlight.It is designed to work with 6 terminations.There are 6 pins on the base of this LED driver.The segment count is 10.This LED driver can be found under the base part number TPS61165.It is acceptable for the supply voltage to be 18V.The voltage output by it is 3V~38V.6 pins are available on the device.According to its characteristics, it is also classified into Display Drivers.It operates with the minimal input voltage of 3V.As a result, it runs at a minimal voltage of 3V in order to achieve the best efficiency.When the maximum supply current is allowed, it reaches 18V.Its high efficiency is based on the fact that the maximal supply current should not exceed 2.3mA.100mA is the maximum current the load can handle.Having the switching frequency at 1.2MHz enables this electronic component to perform at its best.In the absence of external factors, 1.5mA current is consumed.
TPS61165DBVT Features
Available in the SOT-23-6 package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.2MHz
TPS61165DBVT Applications
There are a lot of Texas Instruments TPS61165DBVT LED Driver ICs applications.
- Architectural lighting
- LED Lightings for Inspection Devices
- LED headlights
- Gallery lighting
- Down lighting
- High-end retail lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- General lighting
- LED Lighting PFCs, Linear Dimmable
- OLED power supply for portable equipment
