TPS61170DRVTG4
| Parameters | |
|---|---|
| Width | 2mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS61170 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Efficiency | 93 % |
| Output Voltage | 38V |
| Output Type | Adjustable |
| Max Output Current | 960mA |
| Operating Supply Voltage | 18V |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 960mA Switch |
| Quiescent Current | 2.3mA |
| Max Output Voltage | 38V |
| Topology | Boost, Buck-Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 3V |
| Height | 800μm |
| Length | 2mm |
TPS61170DRVTG4 Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. In this voltage regulator, there are a total of 6 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. For space-saving purposes, this voltage regulator is available in the 6-WDFN Exposed Pad package. In this case, DC DC switching regulator has 1 outputs configured to it. ICs such as this voltage regulator are capable of generating Adjustable outputs through their output pins. Surface Mount-mount switching regulator. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. 1.2MHz is the switching frequency of this DC-DC switching regulator. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 3V. DC DC switching regulator's maximum design flexibility comes from its output current of 960mA Switch. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. Voltage regulator is designed to provide a nominal input voltage of 3.6V to meet the operation requirements. As part of the TPS61170 series of regulators, the voltage regulators can be found. Voltage can be produced at 38V volts by voltage regulator. In order to operate voltage regulator, there are 6 pins that must be connected. This voltage regulator 12v should be configured with an output voltage that is at least 3V. The maximum output current reaches 960mA A to meet the switching regulator operation requirements. It provides the adjusting voltage regulator's maximal output voltage of 38V. 18V is the supply voltage for this DC-DC switching regulator. There is no external influence on harley voltage regulator as it consumes 2.3mA A of quiescent current.
TPS61170DRVTG4 Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 18V
TPS61170DRVTG4 Applications
There are a lot of Texas Instruments TPS61170DRVTG4 Voltage Regulators applications.
- Window air conditioners
- Photovoltaic power
- SMT equipment
- Product burn-in
- Industrial robots
- Terrestrial set-top boxes
- Medical monitoring systems
- Nuclear power plants
- Serial communication converter
- Precision electronic equipment
