TPS61181ARTET
| Parameters | |
|---|---|
| Base Part Number | TPS61181 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Max Output Current | 1.5A |
| Power Supplies | 10.8V |
| Max Supply Voltage | 24V |
| Min Supply Voltage | 4.5V |
| Output Current | 1.5A |
| Max Supply Current | 3mA |
| Quiescent Current | 2mA |
| Voltage - Output | 38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 5V |
| Max Input Voltage | 24V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.005 MHz |
| Dimming | PWM |
| Number of Segments | 60 |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
TPS61181ARTET Overview
Its 16-WFQFN Exposed Pad package is used to save board space. For the design of this LED driver, 6 outputs are used.Mounting is done according to the Surface Mount method.It emergys as a DC DC Regulator with high efficiency and reliable performance.When the temperature is -40°C~85°C TA, it can work normally.The benefits are considerable for Backlight.As a result, it operates on the basis of frequency 1MHz.There are 16 terminations associated with it.It has a base of 16 pins.60 segments are present.Under the base part number TPS61181, you will find this LED driver.Ideally, the supply voltage should be 24V.The output voltage of the device is 38V.16 pins are used on the device.It is also classified into Display Drivers according to its characteristics.At its minimal input voltage, it operates at 5V.For maximum efficiency, it requires a minimal supply voltage of 4.5V.The allowable maximum value of supply current reaches 24V.In order to maintain maximum efficiency, the supply current cannot exceed 3mA.There is no current available to supply to the load.When operating with a maximum output current of 1.5A, it can deliver all the benefits of a LED driver.The consumption of current is 2mAin the absence of external factors.
TPS61181ARTET Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 10.8V
TPS61181ARTET Applications
There are a lot of Texas Instruments TPS61181ARTET LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- High-end retail lighting
- Replacement lamps
- Gallery lighting
- General lighting
- White LED Backlight for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Sports Facility Lighting
- Portable lighting
- Panel lighting
