TPS61181RTER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.05W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.15V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | TPS61181 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 3.15V |
| Power Supplies | 3/3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 2.05W |
| Output Current | 1.5A |
| Max Supply Current | 3mA |
| Quiescent Current | 2mA |
| Voltage - Output | 38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 3.6V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Low Level Output Current | 25mA |
| fmax-Min | 1.2 MHz |
| Dimming | PWM |
| Number of Segments | 60 |
| Voltage - Supply (Max) | 24V |
| Voltage - Supply (Min) | 5V |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61181RTER Overview
Using its 16-WFQFN Exposed Pad package, it is possible to save board space. There are 6 outputs used for the design of this LED drivers.The led light driver is mounted using Surface Mount.When it emerges as a DC DC Regulator, it shows high-performance and reliability.It is able to work normally at the operating temperature of -40°C~85°C TA.As a result, Backlight is likely to benefit greatly.1MHz is the frequency in which it operates.In this case, there are 16 terminations.The base of this board is configured as 16 pins.Undetermined failures will occur if the voltage supply is less than 5V.In total, it includes 60 segments.This LED driver can be found under the base part number TPS61181.The voltage of 3.6V is acceptable.It has a voltage output of 38V.The device has 16 pins.In this case, the maximum value will be 24V.Moreover, it can be classified as Display Drivers due to its characteristics.A minimal input voltage of 2.7V is required for it to operate.A minimal supply voltage of 2.7V is required for it to achieve the highest efficiency.In the event that the maximum supply current is allowed, it reaches 3.6V.This device is able to provide high efficiency when the maximal supply current should be less than 3mA.There is no current that can be supplied to the load.It is necessary to power systems with a voltage of 3.15VLED drivers deliver all their benefits with a maximum output current of 1.5A.Absent external factors, there is 2mA consumption of current.
TPS61181RTER Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.15V
Operating with the supply voltage of 3.15V
TPS61181RTER Applications
There are a lot of Texas Instruments TPS61181RTER LED Driver ICs applications.
- Stage and Studio lighting
- Flicker-free LED Lighting using R1580N
- OLED power supply for portable equipment
- Constant Voltage Power Source for portable equipment
- Portable lighting
- General lighting
- LED Lightings for Inspection Devices
- Other Electronic Devices
- Industrial LED Lighting: Image Recognition Devices
- Down lights
