TPS61181RTET
| Parameters | |
|---|---|
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.05W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.15V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | TPS61181 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 3.15V |
| Power Supplies | 3/3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 2.05W |
| Output Current | 1.5A |
| Max Supply Current | 3mA |
| Quiescent Current | 2mA |
| Voltage - Output | 38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 3.6V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Low Level Output Current | 25mA |
| fmax-Min | 1.2 MHz |
| Dimming | PWM |
| Number of Segments | 60 |
| Voltage - Supply (Max) | 24V |
| Voltage - Supply (Min) | 5V |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 3mm |
TPS61181RTET Overview
There is also a 16-WFQFN Exposed Pad package that is used to save space on the board. For the design of these LED drivers, 6 outputs are used.The led light driver is mounted using Surface Mount.As a DC DC Regulator, it has high efficiency and reliability.-40°C~85°C TA is the operating temperature for the led light driver.A number of benefits are available to Backlight.The system operates at a frequency of 1MHz.A termination of 16 is used to operate the LED driver.With a base of 16, this LED light driver is configured.If the voltage supply is less than 5V, undetermined failures will occur.60 segments exist.A base part number of TPS61181 is associated with this LED driver.An acceptable maximum value for the supply voltage is 3.6V.The output voltage of this device is 38V.In this device, there are 16 pins.There is a maximum value of 24V supply voltage supported by this device. According to its characteristics, it is also classified into Display Drivers.The minimal input voltage is 2.7V.This system is designed to operate at a minimum voltage of 2.7V to achieve maximum efficiency.3.6V is the maximum value of supply current that can be used.Whenever the supply current is lower than 3mA, it can provide high efficiency.It is possible to supply the load with 1.5A current.In order to power systems, 3.15V voltage is needed.LED drivers deliver all their benefits with a maximum output current of 1.5A.A current of 2mA is consumed in the absence of external influences.
TPS61181RTET Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.15V
Operating with the supply voltage of 3.15V
TPS61181RTET Applications
There are a lot of Texas Instruments TPS61181RTET LED Driver ICs applications.
- Stage and Studio lighting
- LED Lightings for Industrial Equipment
- Medical surgery lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- A- lamps
- Portable lighting
- Sports Facility Lighting
- Down lights
- High-end retail lighting
