TPS61181RTETG4
| Parameters | |
|---|---|
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.15V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.2MHz |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 3.15V |
| Power Supplies | 3/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Power Dissipation-Max | 2.05W |
| Power Dissipation | 2.05W |
| Quiescent Current | 2mA |
| Voltage - Output | 38V |
| Topology | Boost |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 3.6V |
| Interface IC Type | LED DISPLAY DRIVER |
| Low Level Output Current | 25mA |
| Number of Segments | 60 |
| Multiplexed Display Capability | NO |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Package / Case | QFN |
| Surface Mount | YES |
| Number of Pins | 16 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
TPS61181RTETG4 Overview
On the board, there is also a QFN package that saves space.It has 6 outputs for LED drivers.A frequency of 1.2MHz is used as the basis for operation.The operation of this system is supported by 16 terminations.The configuration of the board is built around 16 pins.The number of segments is estimated to be 60.There is no problem with the voltage of 3.6V.A voltage output of 38V is provided by this device.A total of 16 pins are present on this device.As a result of its characteristics, it is also classified as Display Drivers.A minimal input voltage of 2.7V is required for it to operate.For highest efficiency, it works with a minimal supply voltage of 2.7V.When the maximum supply current is allowed, the value reaches 3.6V.For stable operation, it is recommended that the operating temperature not exceed 85°C.Stable operation requires a temperature greater than -40°C.Powering systems requires 3.15V voltages.When operating at the maximum output current of 1.5A, it is capable of providing all the benefits associated with LED drivers.When no external factors are present, there is 2mA current consumption.The interface IC for this part is marked with the LED DISPLAY DRIVER.
TPS61181RTETG4 Features
Available in the QFN package
Frequency of 1.2MHz
Supply voltage of 3.15V
Operating with the supply voltage of 3.15V
TPS61181RTETG4 Applications
There are a lot of Texas Instruments TPS61181RTETG4 LED Driver ICs applications.
- Stage Lighting and Signage
- General lighting
- Scanners and Handy Terminals
- LED Lightings for Industrial Equipment
- Down lighting
- LED headlights
- Down lights
- Medical surgery lighting
- A- lamps
- Auxiliary lights for on-vehicle cameras
