TPS61182RTERG4
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Additional Feature | IT ALSO NEED 5 TO 24 V VBAT SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.05W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.15V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.3MHz |
| Base Part Number | TPS61182 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 3.15V |
| Power Supplies | 3/3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 2.05W |
| Quiescent Current | 2mA |
| Voltage - Output | 38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 3.6V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Low Level Output Current | 25mA |
| fmax-Min | 0.001 MHz |
| Dimming | PWM |
| Number of Segments | 60 |
| Voltage - Supply (Max) | 24V |
| Voltage - Supply (Min) | 5V |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
TPS61182RTERG4 Overview
16-WFQFN Exposed Pad saves board space. These LED drivers have 6 outputs.The mounting method adopted is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is able to work normally at the operating temperature of -40°C~85°C TA.There are considerable benefits for Backlight.The frequency of 1.3MHz is used as the basis for its operation.There are 16 terminations that are designed to operate with it.The base of this board is configured as 16 pins.A voltage supply less than 5V could result in undetermined failures.It is estimated that there are 60 segments.The LED driver can be found under the base part number TPS61182.There is no problem with the voltage of 3.6V.The voltage at the output terminal is 38V.There are 16 pins on it.There is a maximum value of 24V that can be used with it.In addition, its characteristics are classified into Display Drivers.A minimal input voltage of 2.7V is required for it to operate.A minimal supply voltage of 2.7V is required for it to achieve the highest efficiency.Whenever the maximum supply current is allowed, the value reaches 3.6V.It is necessary to use 3.15V voltage to power systems.At maximum output current 1.5A, it will deliver all the benefits of a LED driver.In the absence of external factors, there is 2mA consumption of current.Additionally, this LED driver is characterized by a IT ALSO NEED 5 TO 24 V VBAT SUPPLY.
TPS61182RTERG4 Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.3MHz
Supply voltage of 3.15V
Operating with the supply voltage of 3.15V
IT ALSO NEED 5 TO 24 V VBAT SUPPLY
TPS61182RTERG4 Applications
There are a lot of Texas Instruments TPS61182RTERG4 LED Driver ICs applications.
- Sports Facility Lighting
- Auxiliary lights for on-vehicle cameras
- Architectural lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Stage Lighting and Signage
- A- lamps
- Replacement lamps
- LED Lightings for Industrial Equipment
- OLED power supply for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
