TPS61182RTETG4
| Parameters | |
|---|---|
| Package / Case | QFN |
| Surface Mount | YES |
| Number of Pins | 16 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT ALSO NEED 5 TO 24 V VBAT SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.15V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.5MHz |
| Pin Count | 16 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 3.15V |
| Power Supplies | 3/3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 6 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Power Dissipation-Max | 2.05W |
| Power Dissipation | 2.05W |
| Max Supply Current | 3mA |
| Current - Output | 1.5A |
| Quiescent Current | 2mA |
| Voltage - Output | 38V |
| Topology | Boost |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 3.6V |
| Interface IC Type | LED DISPLAY DRIVER |
| Low Level Output Current | 25mA |
| Number of Segments | 60 |
| Multiplexed Display Capability | NO |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS61182RTETG4 Overview
The QFN package is used for saving board space. The frequency of 1.5MHz determines how it operates.There are 16 terminations associated with it.There are 16 pins on the base of this LED driver.There are estimated to be 60 segments.The voltage of 3.6V is acceptable.It produces a voltage of 38V volts.It is equipped with 16 pin count.In addition, it can be classified as Display Drivers according to its characteristics.At its minimal input voltage, it operates at 2.7V.The system works with a minimum supply voltage of 2.7V in order to achieve maximum efficiency.Whenever the maximum supply current is allowed, the value reaches 3.6V.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 3mA.Operating temperatures should not exceed 85°C in order to ensure stable operation.Stable operation requires a temperature higher than -40°C.There is 3.15V internal voltage required to power systems.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 1.5A.2mA current is consumed in the case of no external factors.There's an interface IC marked with LED DISPLAY DRIVER on this part.The current output of the part should remain at 1.5A.A total of 6 channels are available for transmission.Moreover, this LED driver contains a IT ALSO NEED 5 TO 24 V VBAT SUPPLY.
TPS61182RTETG4 Features
Available in the QFN package
Frequency of 1.5MHz
Supply voltage of 3.15V
Operating with the supply voltage of 3.15V
IT ALSO NEED 5 TO 24 V VBAT SUPPLY
TPS61182RTETG4 Applications
There are a lot of Texas Instruments TPS61182RTETG4 LED Driver ICs applications.
- Panel lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Flicker-free LED Lighting using R1580N
- Architectural lighting
- LED Lighting PFCs, Linear Dimmable
- Stage and Studio lighting
- Museum lighting
- Street lighting
- Sports Facility Lighting
- Dimmable LED for vehicle interiors
