TPS61201DRCR
| Parameters | |
|---|---|
| Base Part Number | TPS61201 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 300mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 0.3V |
| Input Voltage-Nom | 1.2V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 1.2A Switch |
| Quiescent Current | 50μA |
| Max Output Voltage | 3.3V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.25MHz~1.65MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 3.3V |
| Nominal Output Voltage | 3.3V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 25.089328mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
TPS61201DRCR Overview
As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. In this voltage regulator, there are a total of 10 terminations. There are two types of analog ICs on this voltage regulator. The first type is a BATTERY CHARGE CONTROLLER-type IC. Space-saving 10-VFDFN Exposed Pad packages are available for this harley voltage regulator. There are 1 outputs configured on the voltage regulator. Fixed outputs are generated on the output pins of this adjusting voltage regulator. This switching regulator is designed to fit the Surface Mount mounting system. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~85°C TA. A DC-DC switching regulator such as this one switches at 1.25MHz~1.65MHz. A dc to dc voltage regulator's minimum input voltage of 0.3V is required for this voltage regulator to operate. This voltage regulator 12v features maximum design flexibility thanks to its 1.2A Switch output current. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 1.2V for the purposes of operation. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. TPS61201 is a family of voltage regulators that belong to the DC/DC industry. A voltage of 3.3V volts can be produced by voltage regulator. For switching regulator operation, 10 pins are used. There should be at least a 3.3V volt output voltage for this switching regulator in order to make it work properly. Switching regulator has a maximum output current of 300mA A, which is sufficient to meet the requirements of operation. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 3.3V. DC-DC switching regulator with 5.5V supply voltage. Voltage regulator consumes 50μA A of quiescent current without being affected by external factors.
TPS61201DRCR Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 5.5V
TPS61201DRCR Applications
There are a lot of Texas Instruments TPS61201DRCR Voltage Regulators applications.
- Radio equipment
- Electric water heaters
- Drilling machines
- Nuclear power plants
- Laboratories
- Telecommunications equipment
- Automation technology
- Hydrogen power
- Domestic water pumps
- Smoke prevention equipment
