TPS61202DSCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS61202 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 0.3V |
| Input Voltage-Nom | 1.2V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 1.2A Switch |
| Quiescent Current | 50μA |
| Max Output Voltage | 5V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.25MHz~1.65MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61202DSCR Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. Throughout this voltage regulator, there are 10 terminations. There is a BATTERY CHARGE CONTROLLER type analog IC in this voltage regulator 12v that is used to convey analog signals. In order to save space, this voltage regulator is packaged in the 10-WFDFN Exposed Pad package. In this case, DC DC switching regulator has 1 outputs configured to it. On the output pins of this DC DC switching regulator, there is a Fixed output generated. This switching regulator is designed to fit the Surface Mount mounting system. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. This voltage regulator 12v reaches a switching frequency of 1.25MHz~1.65MHz. Regulator 0.3V can operate with dc to dc voltage regulator's minimum input voltage 0.3V. As a result of the 1.2A Switch output current, voltage regulator offers maximum flexibility in design. There is a voltage regulator maximum input voltage of 5.5V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 1.2V is provided. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. As a member of the TPS61202 family of DC/DC regulators, this is a DC/DC regulator. Voltage can be produced at 5V volts by voltage regulator. The switching regulator operation of the system is controlled by 10 pins. The maximum output current reaches 600mA A to meet the switching regulator operation requirements. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 5V. Switching regulators such as this operate from voltages of 5.5V. External factors have no impact on DC DC switching regulator's ability to consume 50μA A of quiescent current.
TPS61202DSCR Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 5.5V
TPS61202DSCR Applications
There are a lot of Texas Instruments TPS61202DSCR Voltage Regulators applications.
- Flexible manufacturing cells
- Automation technology
- Serial communication converter
- Refrigerators of central air conditioners
- Sink circuits
- Bending machines
- Radio equipment
- Geothermal power
- Computed tomography (CT)
- Grinders
