TPS61301YFFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 1.92MHz |
| Base Part Number | TPS61301 |
| Pin Count | 20 |
| Number of Outputs | 3 |
| Max Output Current | 1.25A |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 1.5A |
| Quiescent Current | 590μA |
| Supply Current-Max | 0.7mA |
| Voltage - Output | 5.7V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 400mA 800mA Flash |
| Internal Switch(s) | Yes |
| High Level Output Current | 8mA |
| Low Level Output Current | 8mA |
| Dimming | I2C |
| Number of Segments | 2 |
| Multiplexed Display Capability | NO |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 400μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61301YFFR Overview
In order to save board space, the 20-UFBGA, DSBGA package is used. Using this LED driver, there are 3 outputs.It adopts the way of Surface Mount for mounting.There is no doubt that this is a very efficient and reliable DC DC Regulator.When the temperature is -40°C~85°C TA, it can work normally.Camera Flash has considerable advantages.The system operates at a frequency of 1.92MHz.In this case, there are 20 terminations.The base of this board is configured as 20 pins.The number of segments is estimated to be 2.LED drivers can be found under the base part number TPS61301.In this case, 5.5V is acceptable.There is a voltage output of 5.7V.In this device, there are 20 pins.Further, its characteristics allow it to be classified as Display Drivers.This device requires a minimum input voltage of 2.5V.A minimum supply voltage of 2.5V is required to meet the highest efficiency standards.There is 5.5V maximum value for supply current.It is possible to supply the load with 1.5A current.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 1.25A.In the absence of external factors, there is 590μA consumption of current.
TPS61301YFFR Features
Available in the 20-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 1.92MHz
Supply voltage of 3.6V
TPS61301YFFR Applications
There are a lot of Texas Instruments TPS61301YFFR LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- White LED Backlight for portable equipment
- High-end retail lighting
- Dimmable LED for vehicle interiors
- Scanners and Handy Terminals
- LED backlight driver for LCD displays for portable equipment
- Refrigeration lighting
- Flicker-free LED Lighting using R1580N
- LED Lightings for Inspection Devices
- Auxiliary lights for on-vehicle cameras
