TPS61305YFFT
| Parameters | |
|---|---|
| Input Characteristics | STANDARD |
| Current - Output / Channel | 400mA 800mA Flash |
| Internal Switch(s) | Yes |
| High Level Output Current | 8mA |
| Low Level Output Current | 8mA |
| Dimming | I2C |
| Number of Segments | 2 |
| Multiplexed Display Capability | NO |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 400μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 1.92MHz |
| Base Part Number | TPS61305 |
| Pin Count | 20 |
| Number of Outputs | 3 |
| Max Output Current | 1.25A |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 1.5A |
| Max Supply Current | 700μA |
| Quiescent Current | 590μA |
| Voltage - Output | 5.7V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
TPS61305YFFT Overview
The 20-UFBGA, DSBGA package conserves board space. This LED driver has 3 outputs.The mounting method is Surface Mount.With high efficiency, it appears as a DC DC Regulator.If the led driver ic is set to -40°C~85°C TA, it will work normally.The benefits of Camera Flash are considerable.In this case, the frequency is 1.92MHz.There are 20 terminations that are designed to operate with it.The LED light driver is configured with a base of 0 pins.There are 2 segments in it.This LED driver can be found under the base part number TPS61305.5.5V is a maximum acceptable voltage for the supply.5.7V is the voltage output.20 pins are available on the device.According to its characteristics, it is also classified into Display Drivers.With a minimum input voltage of 2.5V volts, it can operate.It works with the minimal supply voltage of 2.5V to meet highest efficiency standards.In terms of supply current, 5.5V is the maximum value.If the maximum current supply is less than 700μA, this device provides high efficiency.1.5A is the maximum current the load can handle.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 1.25A.Absent external factors, there is 590μA consumption of current.
TPS61305YFFT Features
Available in the 20-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 1.92MHz
Supply voltage of 3.6V
TPS61305YFFT Applications
There are a lot of Texas Instruments TPS61305YFFT LED Driver ICs applications.
- Stage Lighting and Signage
- LED headlights
- Refrigeration lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lightings for Inspection Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Linear fluorescent
- A- lamps
- Industrial LED Lighting: Image Recognition Devices
- Museum lighting
