TPS62100D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS62100 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 8V |
| Output Type | Adjustable |
| Max Output Current | 500mA |
| Operating Supply Voltage | 9V |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 7.2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 230μA |
| Output Configuration | Positive |
| Quiescent Current | 164μA |
| Max Output Voltage | 8V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Voltage - Output (Max) | 8V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS62100D Overview
A Tube package is used in this voltage regulator to optimize performance. During the development of this harley voltage regulator, 8 terminations were made. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-SOIC (0.154, 3.90mm Width) package. 1 outputs of voltage regulator are configured. On its output pins, this adjusting voltage regulator generates Adjustable output. There is a switching regulator that is compatible with the Surface Mount mounting. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. There is a switching frequency of 300kHz for this voltage regulator 12v. Input voltage 2.5V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 7.2V. In the particular voltage regulators, the TPS62100 family is represented. There is a possibility that DC DC switching regulator can give voltage at 8V volts. 8 pins are used for switching regulator operation. For this switching regulator, it is recommended that the output voltage is at least 800mV volts. A 500mA A maximum output current is required to meet the switching regulator operation requirements. The maximum output voltage of 8V makes DC DC switching regulator easy to operate. The maximum output voltage of this regulator voltage is 8V. Switching regulators such as this operate from voltages of 9V. External factors have no impact on DC DC switching regulator's ability to consume 164μA A of quiescent current.
TPS62100D Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 9V
TPS62100D Applications
There are a lot of Texas Instruments TPS62100D Voltage Regulators applications.
- Mobile phones
- Cutting machine tools
- Linear guide
- Surge protection circuits
- Motor controller circuits
- Handheld GPS
- Wide-range voltage regulation circuits
- Experimental setup
- Analog precision reference circuits
- Die casting equipment
