TPS62102DR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | TPS62102 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 9V |
| Output Voltage | 8V |
| Output Type | Adjustable |
| Max Output Current | 500mA |
| Operating Supply Voltage | 9V |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 7.2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 164μA |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS62102DR Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. As you can see, this harley voltage regulator contains 8 terminations. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHING REGULATOR voltage regulator. For space-saving purposes, this voltage regulator is available in the 8-SOIC (0.154, 3.90mm Width) package. 1 outputs have been configured in the voltage regulator 12v. This DC DC switching regulator generates Adjustable output on its output pins. This voltage regulator 12v fits the Surface Mount mounting. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. There is a switching frequency of 1MHz for this voltage regulator 12v. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2.5V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V. Voltage regulator has an input voltage (Max) of 9V. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 7.2V. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. In the particular voltage regulators, the TPS62102 family is represented. A voltage of 8V volts can be produced by voltage regulator. 8 pins are used for switching regulator operation. A 500mA A maximum output current is required to meet the switching regulator operation requirements. With 9V as the supply voltage, this DC-DC switching regulator will operate. External factors have no impact on DC DC switching regulator's ability to consume 164μA A of quiescent current.
TPS62102DR Features
1 outputs
8 pins
Operating supply voltage of 9V
TPS62102DR Applications
There are a lot of Texas Instruments TPS62102DR Voltage Regulators applications.
- Bending machines
- Window air conditioners
- Remotely powered electric motors
- Direct power supply system
- Experimental setup
- Scientific research
- Surface processing equipment
- Serial communication converter
- Smoke exhaust equipment
- Scientific testing
