TPS62120DCNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS62120 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Voltage - Input (Max) | 15V |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Max Output Current | 75mA |
| Operating Supply Voltage | 15V |
| Voltage - Input (Min) | 2V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 11μA |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 800kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.2V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.63mm |
| Thickness | 1.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS62120DCNR Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. Throughout this voltage regulator, there are 8 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space-saving SOT-23-8 packages are available for this harley voltage regulator. 1 outputs of voltage regulator are configured. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. A Surface Mount mounting is required for this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. Up to 800kHz is the switching frequency of this DC-DC switching regulator. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. As far as the voltage input is concerned, DC DC switching regulator can accept up to 15V. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. The voltage regulator 12v is designed to provide a nominal input voltage of 8V for operation. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. DC/DC regulators such as this one belong to the TPS62120 family of products. The voltage DC DC switching regulator can provide is up to 5.5V volts. To operate the voltage regulator 12v, 8 pins are required. Ideally this switch regulator should have an output voltage of about 1.2V at the very least. A maximum output current of 75mA A is available to meet the switching regulator operation requirements. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 5.5V. Switching regulators operate at 15V supply voltages. External factors do not affect voltage regulator's consumption of 11μA A of quiescent current. I would recommend this voltage regulator for use on a 8V volt supply, as it is suitable for this application.
TPS62120DCNR Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 15V
TPS62120DCNR Applications
There are a lot of Texas Instruments TPS62120DCNR Voltage Regulators applications.
- Textile machinery
- Scientific research
- Shearing machines
- Solar power plants
- ATMs
- Access control systems
- Network technology
- Industrial controllers
- Handheld GPS
- Printing
