TPS62130RGTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | DCS-Control™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS62130 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 6V |
| Output Type | Adjustable |
| Max Output Current | 3A |
| Operating Supply Voltage | 17V |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 17μA |
| Max Output Voltage | 6V |
| Voltage - Output (Min/Fixed) | 0.9V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 900mV |
| Voltage - Output (Max) | 6V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS62130RGTR Features
? DCS-Control? topology
? Input voltage range: 3 V to 17 V
? Up to 3-A output current
? Adjustable output voltage from 0.9 V to 6 V
? Pin-selectable output voltage (nominal, + 5%)
? Programmable soft start and tracking
? Seamless power save mode transition
? Quiescent current of 17 μA (typical)
? Selectable operating frequency
? Power-good output
? 100% duty cycle mode
? Short circuit protection
? Overtemperature protection
? Pin-to-pin compatible with the TPS62140 and
TPS62150
? Available in a 3-mm × 3-mm, QFN-16 package
Use the TPS82130 for faster designs
TPS62130RGTR Applications
? Standard 12-V rail supplies
? POL supply from single or multiple Li-ion battery
? Solid-state drives
? Embedded systems
? LDO replacement
? Mobile PCs, tablets, modems, cameras
? Server, microserver
? Data terminal, point of sales (ePOS)
TPS62130RGTR Discription
The TPS6213x series is an easy-to-use synchronous buck DC-DC converter optimized for high power density applications. Usually a high switching frequency of 2.5 MHz allows the use of small inductors and provides fast transient response and high output voltage accuracy through the use of DCS-Control topologies.
These devices have a wide operating input voltage range of 3 V to 17 V and are ideal for systems powered by lithium-ion or other batteries and 12 V intermediate power rails. They support continuous output currents of up to 3mura at output voltages between 0.9 V and 6 V (100% duty cycle mode). The output voltage start ramp is controlled by soft start pins and is allowed to run as a stand-alone power supply or in a tracking configuration. Power sequencing can also be achieved by configuring good pins for enable and open-drain power supplies.
In power-saving mode, the device receives a static current of about 17 microamperes from the VIN. Power-saving mode, if the load is small, enter automatically and seamlessly, and maintain high efficiency throughout the load range. In turn-off mode, the device is turned off, and the turn-off current consumption is less than 2 microA.
The device is available in adjustable and fixed output voltage versions and is packaged in a 16-pin VQFN package with a size of 3 mm × 3 mm (RGT).
? DCS-Control? topology
? Input voltage range: 3 V to 17 V
? Up to 3-A output current
? Adjustable output voltage from 0.9 V to 6 V
? Pin-selectable output voltage (nominal, + 5%)
? Programmable soft start and tracking
? Seamless power save mode transition
? Quiescent current of 17 μA (typical)
? Selectable operating frequency
? Power-good output
? 100% duty cycle mode
? Short circuit protection
? Overtemperature protection
? Pin-to-pin compatible with the TPS62140 and
TPS62150
? Available in a 3-mm × 3-mm, QFN-16 package
Use the TPS82130 for faster designs
TPS62130RGTR Applications
? Standard 12-V rail supplies
? POL supply from single or multiple Li-ion battery
? Solid-state drives
? Embedded systems
? LDO replacement
? Mobile PCs, tablets, modems, cameras
? Server, microserver
? Data terminal, point of sales (ePOS)
TPS62130RGTR Discription
The TPS6213x series is an easy-to-use synchronous buck DC-DC converter optimized for high power density applications. Usually a high switching frequency of 2.5 MHz allows the use of small inductors and provides fast transient response and high output voltage accuracy through the use of DCS-Control topologies.
These devices have a wide operating input voltage range of 3 V to 17 V and are ideal for systems powered by lithium-ion or other batteries and 12 V intermediate power rails. They support continuous output currents of up to 3mura at output voltages between 0.9 V and 6 V (100% duty cycle mode). The output voltage start ramp is controlled by soft start pins and is allowed to run as a stand-alone power supply or in a tracking configuration. Power sequencing can also be achieved by configuring good pins for enable and open-drain power supplies.
In power-saving mode, the device receives a static current of about 17 microamperes from the VIN. Power-saving mode, if the load is small, enter automatically and seamlessly, and maintain high efficiency throughout the load range. In turn-off mode, the device is turned off, and the turn-off current consumption is less than 2 microA.
The device is available in adjustable and fixed output voltage versions and is packaged in a 16-pin VQFN package with a size of 3 mm × 3 mm (RGT).
