TPS62132RGTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | DCS-Control™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS62132 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Voltage - Input (Max) | 17V |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 3A |
| Operating Supply Voltage | 17V |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 17μA |
| Max Output Voltage | 3.3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 3.3V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS62132RGTR Description
The TPS62132 family are easy-to-use synchronous step down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by use of the DCS-Control topology.
With their wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other batteries as well as from 12-V intermediate power rails. They support up to 3-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). The output voltage start-up ramp is controlled by the soft-start pin, which allows operation as either a stand-alone power supply or in tracking configurations. Power sequencing is also possible by configuring the Enable and open-drain Power Good pins.
The TPS62132RGTR device, available in adjustable and fixed output voltage versions, is packaged in a 16-pin VQFN package measuring 3 mm × 3 mm (RGT).
TPS62132RGTR Features
● DCS-Control? topology
● Input voltage range: 3 V to 17 V
● Up to 3-A output current
● Adjustable output voltage from 0.9 V to 6 V
● Pin-selectable output voltage (nominal, + 5%)
● Programmable soft start and tracking
● Seamless power save mode transition
● Quiescent current of 17 μA (typical)
● Selectable operating frequency
● Power-good output
● 100% duty cycle mode
● Short circuit protection
● Overtemperature protection
TPS62132RGTR Applications
● Standard 12-V rail supplies
● POL supply from single or multiple Li-ion battery
● Solid-state drives
● Embedded systems
● LDO replacement
● Mobile PCs, tablets, modems, cameras
● Server, microserver
● Data terminal, point of sales (ePOS)
The TPS62132 family are easy-to-use synchronous step down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by use of the DCS-Control topology.
With their wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other batteries as well as from 12-V intermediate power rails. They support up to 3-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). The output voltage start-up ramp is controlled by the soft-start pin, which allows operation as either a stand-alone power supply or in tracking configurations. Power sequencing is also possible by configuring the Enable and open-drain Power Good pins.
The TPS62132RGTR device, available in adjustable and fixed output voltage versions, is packaged in a 16-pin VQFN package measuring 3 mm × 3 mm (RGT).
TPS62132RGTR Features
● DCS-Control? topology
● Input voltage range: 3 V to 17 V
● Up to 3-A output current
● Adjustable output voltage from 0.9 V to 6 V
● Pin-selectable output voltage (nominal, + 5%)
● Programmable soft start and tracking
● Seamless power save mode transition
● Quiescent current of 17 μA (typical)
● Selectable operating frequency
● Power-good output
● 100% duty cycle mode
● Short circuit protection
● Overtemperature protection
TPS62132RGTR Applications
● Standard 12-V rail supplies
● POL supply from single or multiple Li-ion battery
● Solid-state drives
● Embedded systems
● LDO replacement
● Mobile PCs, tablets, modems, cameras
● Server, microserver
● Data terminal, point of sales (ePOS)
