Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 20 hours ago) |
Mounting Type |
Surface Mount |
Package / Case |
6-UFDFN |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
ALSO HAS PWM AND PFM CONTROL TECHNIQUE |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
TPS62230 |
Function |
Step-Down |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Efficiency |
94 % |
Voltage - Input (Max) |
6V |
Output Voltage |
2.5V |
Output Type |
Fixed |
Max Output Current |
500mA |
Operating Supply Voltage |
6V |
Voltage - Input (Min) |
2.05V |
Input Voltage-Nom |
3.6V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Quiescent Current |
22μA |
Max Output Voltage |
2.5V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
3MHz |
Control Technique |
HYSTERETIC CURRENT MODE |
Synchronous Rectifier |
Yes |
Min Output Voltage |
2.5V |
Height |
600μm |
Length |
1.45mm |
Width |
1mm |
Thickness |
500μm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS62230DRYR Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. In this voltage regulator, there are 6 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Space savings are achieved by placing this voltage regulator in the 6-UFDFN package. There are 1 outputs configured on the voltage regulator. On its output pins, this adjusting voltage regulator generates Fixed output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. This voltage regulator 12v reaches a switching frequency of 3MHz. A dc to dc voltage regulator's minimum input voltage of 2.05V is required for this voltage regulator to operate. Voltage regulator has an input voltage (Max) of 6V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. In this case, the DC/DC regulator belongs to the family TPS62230. Voltage regulator is capable of giving voltage at 2.5V volts. The switching regulator operation of the system is controlled by 6 pins. In order for this switching regulator to work properly, the output voltage should be at least 2.5VV. Switching regulator has a maximum output current of 500mA A, which is sufficient to meet the requirements of operation. With a maximum output voltage of 2.5V, DC DC switching regulator has a very high efficiency. 6V is the supply voltage for this DC-DC switching regulator. There is no external influence on harley voltage regulator as it consumes 22μA A of quiescent current. Switching regulators with the ALSO HAS PWM AND PFM CONTROL TECHNIQUE feature are more efficient and stable.
TPS62230DRYR Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 6V
ALSO HAS PWM AND PFM CONTROL TECHNIQUE
TPS62230DRYR Applications
There are a lot of Texas Instruments TPS62230DRYR Voltage Regulators applications.
- USB circuits
- Television equipment
- Drilling machines
- Radio equipment
- Machining centers
- Linear guide
- Plate bending machines
- Terrestrial set-top boxes
- Low output voltage switching power supply circuits
- Overvoltage protection circuits in TV sets