TPS62235DRYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO HAS PWM AND PFM CONTROL TECHNIQUE |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS62235 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 94 % |
| Voltage - Input (Max) | 6V |
| Output Voltage | 1.2V |
| Output Type | Fixed |
| Max Output Current | 500mA |
| Operating Supply Voltage | 6V |
| Voltage - Input (Min) | 2.05V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 22μA |
| Max Output Voltage | 1.2V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.2V |
| Height | 600μm |
| Length | 1.45mm |
| Width | 1mm |
| Thickness | 500μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS62235DRYR Overview
As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. In this voltage regulator, 6 terminations are present. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 6-UFDFN package. A total of 1 outputs are configured in this voltage regulator. The adjusting voltage regulator generates Fixed output. The voltage regulator 12v fits the Surface Mount mounting hole. During switching regulator operation, the operating temperature should remain at -40°C~125°C TJ. A DC-DC switching regulator of this type operates at a switching frequency of 2MHz. The voltage regulator can be operated with a voltage as low as 2.05V as an input voltage. There is a voltage regulator maximum input voltage of 6V. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.6V as the nominal input voltage. In this case, the DC/DC regulator belongs to the family TPS62235. There is a possibility that DC DC switching regulator can give voltage at 1.2V volts. To operate the voltage regulator 12v, 6 pins are required. For this switching regulator, it is recommended that the output voltage is at least 1.2V volts. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 500mA A. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 1.2V. Switching regulators operate at 6V supply voltages. There is no external influence on harley voltage regulator as it consumes 22μA A of quiescent current. This switching regulator is more efficient and stable due to the ALSO HAS PWM AND PFM CONTROL TECHNIQUE feature.
TPS62235DRYR Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 6V
ALSO HAS PWM AND PFM CONTROL TECHNIQUE
TPS62235DRYR Applications
There are a lot of Texas Instruments TPS62235DRYR Voltage Regulators applications.
- Product testing
- Emergency lighting monitoring equipment
- Photovoltaic power
- Imported equipment
- Direct power supply system
- Low output voltage switching power supply circuits
- Servo drive system
- Refrigerators of central air conditioners
- Nuclear power plants
- Hydraulic presses
