TPS62590DRVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS62590 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 15μA |
| Max Output Voltage | 5.5V |
| Voltage - Output (Min/Fixed) | 0.75V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 2.25MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 750mV |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS62590DRVT Overview
optimized performance is achieved by utilizing the Tape & Reel (TR) package in this voltage regulator. During the development of this harley voltage regulator, 6 terminations were made. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. The harley voltage regulator is available as a 6-WDFN Exposed Pad package to save space. There are 1 outputs on DC DC switching regulator. On its output pins, this adjusting voltage regulator generates Adjustable output. The voltage regulator 12v fits the Surface Mount mounting hole. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. 2.25MHz is the switching frequency of this DC-DC switching regulator. Input voltage 2.5V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.75V. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. For operation, voltage regulator provides a nominal input voltage of 3.6V. As part of the TPS62590 series of regulators, the voltage regulators can be found. Voltage can be produced at 5.5V volts by voltage regulator. During switching regulator operation, 6 pins are used. Ideally this switch regulator should have an output voltage of about 750mV at the very least. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 1A A. There is a maximum output voltage of 5.5V from this voltage regulator 12v. This DC-DC switching regulator operates from a supply voltage of 5.5V. Voltage regulator consumes 15μA A of quiescent current without being affected by outside forces.
TPS62590DRVT Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 5.5V
TPS62590DRVT Applications
There are a lot of Texas Instruments TPS62590DRVT Voltage Regulators applications.
- Arc suppression circuits
- Domestic water pumps
- Overvoltage protection circuits in TV sets
- Network technology
- Computer application technology
- Sensitive electronic devices
- CMM
- Alternators
- Surface processing equipment
- Computer rooms
