TPS62621YFFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | PFM CONTROL TECHNIQUE IS ALSO POSSIBLE |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.4mm |
| Base Part Number | TPS62621 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 1.8V |
| Output Type | Fixed |
| Max Output Current | 600mA |
| Input Voltage-Nom | 3.6V |
| Min Supply Voltage | 2.3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 31μA |
| Output Configuration | Positive |
| Quiescent Current | 31μA |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 6MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.8V |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 535μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS62621YFFR Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. In this voltage regulator, there are 6 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. In order to save space, this voltage regulator is packaged in the 6-UFBGA, DSBGA package. The voltage regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Fixed output on its output pins. This switching regulator is designed to fit the Surface Mount mounting system. Keeping dc to dc voltage regulator's operating temperature at -40°C~85°C TA is essential when operating. The switching frequency of this DC-DC switching regulator reaches 6MHz. Voltage regulators' input voltage is limited to 5.5V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 3.6V. In this case, the DC/DC regulator belongs to the family TPS62621. Voltage can be produced at 1.8V volts by voltage regulator. In order to operate voltage regulator, there are 6 pins that must be connected. This voltage regulator 12v should be configured with an output voltage that is at least 1.8V. Switching regulator has a maximum output current of 600mA A, which is sufficient to meet the requirements of operation. Voltage regulator consumes 31μA A of quiescent current without being affected by external factors. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 2.3V V. Switching regulators with PFM CONTROL TECHNIQUE IS ALSO POSSIBLE features are highly efficient and stable.
TPS62621YFFR Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
TPS62621YFFR Applications
There are a lot of Texas Instruments TPS62621YFFR Voltage Regulators applications.
- Smart grid
- Computer-related products
- Solar power plants
- Flaw detection equipment
- Wind power
- Smoke exhaust equipment
- Die casting equipment
- Computer rooms
- Terrestrial set-top boxes
- ATMs
