banner_page

TPS63060DSCR

10 Terminals 10-Pin TPS63060 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 2.4MHz Tape & Reel (TR) 2A Switch 10-WFDFN Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS63060DSCR
  • Package: 10-WFDFN Exposed Pad
  • Datasheet: -
  • Stock: 399
  • Description: 10 Terminals 10-Pin TPS63060 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 2.4MHz Tape & Reel (TR) 2A Switch 10-WFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-WFDFN Exposed Pad
Number of Pins 10
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 10
ECCN Code EAR99
Subcategory Switching Regulator or Controllers
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Terminal Pitch 0.5mm
Base Part Number TPS63060
Function Step-Up/Step-Down
Number of Outputs 1
Efficiency 93 %
Output Voltage 8V
Output Type Adjustable
Max Output Current 1A
Operating Supply Voltage 12V
Input Voltage-Nom 5V
Max Supply Voltage 12V
Min Supply Voltage 2.5V
Analog IC - Other Type SWITCHING REGULATOR
Nominal Supply Current 30μA
Output Configuration Positive
Current - Output 2A Switch
Quiescent Current 30μA
Max Output Voltage 8V
Topology Buck-Boost
Control Mode CURRENT-MODE
Frequency - Switching 2.4MHz
Control Technique PULSE WIDTH MODULATION
Synchronous Rectifier Yes
Min Output Voltage 2.5V
Max Duty Cycle 100 %
Max Junction Temperature (Tj) 125°C
Ambient Temperature Range High 85°C
Height 800μm
Length 3mm
Width 3mm
Thickness 750μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS63060DSCR Description


The TPS63060 devices provide a power supply solution for products powered by either three-cell up to six-cell alkaline, NiCd or NiMH battery, or a one-cell or dual-cell Li-Ion or Li-polymer battery. Output currents can go as high as 2 A while using a dual-cell Li-Ion or Li-polymer battery, and discharge to 5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power save mode to maintain high efficiency over a wide load current range. The power save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 2.25 A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load disconnects from the battery. The devices are available in a 3 mm × 3 mm, 10-pin, WSON (DSC) package.



TPS63060DSCR Features


  • Input voltage range: 2.5 V to 12 V

  • Efficiency: Up to 93%

  • Automatic transition between step down and boost mode

  • Typical device quiescent current: < 30 μA

  • Fixed and adjustable output voltage options from 2.5 V to 8 V

  • Power save mode for improved efficiency at low output power

  • Forced fixed-frequency operation at 2.4 MHz and synchronization possible

  • Power good output

  • Buck-Boost Overlap Control?

  • Load disconnect during shutdown

  • Overtemperature protection

  • Overvoltage protection



TPS63060DSCR Applications


  • Dual Li-ion application

  • Digital still cameras (DSC) and camcorders

  • Notebook computer

  • Industrial metering equipment

  • Ultra mobile PCs and mobile internet devices

  • Personal medical products

  • High-power LEDs


Write a review

Note: HTML is not translated!
    Bad           Good